高方平篩傳動機構設計與有限元分析

1.4萬字 48頁 原創作品，已通過查重系統


畢業設計說明書（論文）中文摘要
高方平篩是現代制粉工業中最主要的、最廣泛采用的篩分設備其中傳動機構是決定篩分效果的關鍵。針對FSFG10×24A型高方平篩，設計了一種無立軸自衡傳動機構，即電動機安裝在篩體上，并隨篩體一起回轉，利用偏重塊產生的離心力帶動篩體運轉。這個傳動機構的設計主要包括：電機的選擇、帶輪的設計、軸承載荷調節機構設計、與篩體連接形式設計、偏重塊結構設計和偏心距可調機構設計。在此基礎上，運用Solidworks構造了各個零件模型和傳動機構三維裝配模型；運用AutoCAD完成了二維裝配圖和零件圖的繪制，并采用SolidWorks Simulation軟件進行有限元，得到最佳的參數匹配設計，從而為后續的高方平篩優化設計打下基礎。

關鍵詞高方平篩 傳動機構 偏心距 偏重塊 有限元


畢業設計說明書（論文）外文摘要
title The Driving device Design and dynamic simulation
for the Square Plansifter

Abstract
Square Plansifter is the uppermost and most extensively adoptive equipment for filtrating and grading in the modern flour milling industry. The driving device is the key to insure the effect of filtrating and grading. Aiming at the square plansifter of FSFG10×24A this paper designs the driving device with no vertical shaft. Namely the electromotor is installed on the body of plansifter and turns round together with it. By using the centrifugal force of eccentric object the body of plansifter is drived to rotate around. According to the request of design this paper completes the following tasks including choice of the electromotor design of the band pulley controllable load machine and of bearing the linking form with the body of plansifter and structure design of the eccentric object. based on that with the software of Solidworks and AutoCAD the three-dimensional assemble model planar assemble model diagram and spare parts diagram of the whole driving device are obtained respectively. Solidworks Simulation software is used for finite element analysis get the best match the design parameters .The above works provide a foundation for follow-up optimization design.
Keywords square plansifter driving device eccentric distance eccentric object finite element analysis

目 錄
1 緒論 2
1.1 課題研究的工業背景 2
1.2 本課題研究的價值及主要工作 5
2 傳動機構的設計計算 6
2.1 確定總體設計方案 6
2.2 電機的選型 7
2.3 帶傳動的設計 11
2.4 偏重平衡裝置的設計 15
2.5 軸組件的設計 19
2.6 軸承載荷調節裝置 32
3 傳動機構裝配過程分析 37
3.1 軸下端的零件的裝配及與下平板的連接 37
3.2 軸上部零件的裝配及與上平板的連接 37
3.3 偏重塊組件的裝配 38
3.4 電機的安裝 38
3.5 帶輪的安裝 39
3.6 完成裝配 39
4 有限元分析 41
4.1 有限元分析的目的 41
4.2 分析過程及結果 41
結論…………………………………………………………………………………………… 42
致謝…………………………………………………………………………………………… 43
參考文獻……………………………………………………………………………………… 44