30萬ta合成氨車間的初步設計.rar
30萬ta合成氨車間的初步設計,合格作品 字?jǐn)?shù)26438摘 要本設計主要介紹了合成氨工藝的國內外發展現狀，從中選擇了中壓法合成氨。并進行了合成氨車間的物料衡算、熱量衡算、主要設備（合成塔）的選型計算及主要輔助設備的選型計算、以及非工藝部分工程概算、技術經濟分析。根據中壓法合成氨繪制了合成車間帶控制點的工藝流程圖，合成塔設備圖，并根據哈爾濱的地理環境設...
該文檔為壓縮文件,包含的文件列表如下:
內容介紹
原文檔由會員 白癡學東西 發布
合格作品 字?jǐn)?shù)26438
摘 要
本設計主要介紹了合成氨工藝的國內外發展現狀，從中選擇了中壓法合成氨。并進行了合成氨車間的物料衡算、熱量衡算、主要設備（合成塔）的選型計算及主要輔助設備的選型計算、以及非工藝部分工程概算、技術經濟分析。根據中壓法合成氨繪制了合成車間帶控制點的工藝流程圖，合成塔設備圖，并根據哈爾濱的地理環境設計了合成氨車間布置圖。
關鍵詞 工程概算 中壓法 合成氨
Abstract
The design focuses on the development of synthetic ammonia process status at home and abroad, selected from ammonia in the pressure method. And had ammonia plant material balance, heat balance, major equipment (reactor) is the major auxiliary equipment sizing and selection of calculation, and non-technology part of the project budget, technical and economic analysis. Ammonia under pressure method in the synthesis of the workshop are drawn flow chart with control points, according to the geographical environment in Harbin ammonia plant layout design.
Key words Engineering budget The pressure method Ammonia
目 錄
摘要 I
Abstract II
第一章 緒論 1
1.1應用領域 1
1.2設計目的及意義 1
1.3產品質量指標 2
第二章 工藝簡介及氨合成反應特點 5
2.1工藝發展 5
2.2氨合成反應特點 8
2.3氨合成方法 9
第三章 工藝詳述 11
3.1催化劑的選擇 11
3.2壓力及溫度的選擇 11
3.3合成塔進塔氣體組成 13
3.4氨合成過程的基本工藝 13
3.5氨合成工藝的選擇 15
第四章 工藝計算 17
4.1 設計要求 17
4.2 物料衡算 18
4.2.1 合成塔物料衡算 18
4.2.2氨分離器氣液平衡計算 20
4.2.3冷交換器氣液平衡計算 21
4.2.4液氨貯槽氣液平衡計算 22
4.2.5液氨貯槽物料衡算 24
4.2.6合成系統物料計算 25
4.2.7合成塔物料計算 26
4.2.8水冷器物料計算 27
4.2.9氨分離器物料計算 27
4.2.10循環機前后物料計算 28
4.2.11冷交換器物料計算 28
4.2.12液氨儲槽物料計算 30
4.2.13物料衡算結果匯總 30
4.3 熱量衡算 35
4.3.1合成塔熱量衡算 35
4.3.2廢熱鍋爐能量衡算 38
4.3.3熱交換器能量衡算 39
4.3.4軟水預熱器能量衡算 40
4.3.5水冷卻器和氨分離器能量衡算 41
4.3.6循環壓縮機能量衡算 42
4.3.7冷交換器與氨冷器能量衡算 44
第五章 主要設備設計及選型校核 46
5.1.1氨合成塔設備計算 46
5.1.2廢熱鍋爐設備計算 47
5.1.3主要設備選型匯總表 52
第六章 車間布置 53
第七章 非工藝專業要求 54
7.1公用工程 54
7.1.1電氣照明 54
7.1.2給排水 54
7.1.3通風除塵 55
7.1.4土建 55
7.1.5機修 55
7.1.6崗位定員 55
7.2環境保護及安全衛生 56
7.2.1化學沉淀-A/O工藝處理合成氨廢水 56
7.2.2安全措施 56
7.2.3防毒 57
7.2.4防火 57
7.2.5防爆 58
7.2.6防燒傷 58
7.2.7防觸電 58
7.2.8防機械傷害 59
7.3節能 59
第八章 技術經濟 61
8.1投入資金 61
8.2經濟效益評估 62
結束語 64
致謝 65
參考文獻 66
Contents
Abstract I
Abstract II
Chapter I. Introduction 1
1.1 Applications 1
1.2 The purpose and significance of the design 1
1.3 The quality of products、target 2
Chapter II. Process description and characteristics of ammonia synthesis reaction 5
2.1Technology Development 5
2.2 The characteristics of ammonia synthesis reaction 8
2.3 Ammonia synthesis 9
Chapter III. Process Description 11
3.1 Selection of Catalysts 11
3.2 The selection of pressure and temperature of 11
3.3 The composition of reactor into the gas tower 13
3.4 The basic process for ammonia synthesis process 13
3.5 Selection process for ammonia synthesis 15
Chapter IV. Process Calculation 17
4.1 Design requirements 17
4.2 Material balance of count 18
4.2.1 reactor material balance 18
4.2.2 Calculation of vapor-liquid equilibrium of ammonia separato 20
4.2.3 Calculation of the cold exchanger , vapor-liquid equilibrium 21
4.2.4 Calculation of liquid ammonia tank iquid equilibrium 22
4.2.5 The material balance of liquid ammonia storage tank 24
4.2.6 Calculation of materials synthesis system 25
4.2.7 Calculation of reactor materials 27
4.2.8 Calculation of water coolers materials 27
4.2.9 Calculation of ammonia separator material 28
4.2.10 Calculation of materials before and after machine cycles 28
4.2.11 Calculation of the cold exchanger materials 29
4.2.12 Calculation of liquid ammonia storage tank materials 30
4.2.13 material balance summary of the results 30
4.3 Heat balance 35
4.3.1 reactor heat balance 35
4.3.2 The energy balance of waste heat boiler 38
4.3.3 Heat exchanger energy balance 39
4.3.4 Soft water heater energy balance 40
4.3.5 water coolers and energy balance of ammonia separator 41
4.3.6 cycle energy balance of 67 compressors 42
4.3.7 Cold switches and energy balance of ammonia cooler 44
Chapter V. Checking the design and selection of major equipment 46
5.1.1 Calculation of ammonia equipment 46
5.1.2 Calculation of waste heat boiler equipment 47
5.1.3 Summary of major equipment selection 52
Chapter VI. Plant layout 53
Chapter VII. Non-technology professional requirements of 54
7.1 Uti..
摘 要
本設計主要介紹了合成氨工藝的國內外發展現狀，從中選擇了中壓法合成氨。并進行了合成氨車間的物料衡算、熱量衡算、主要設備（合成塔）的選型計算及主要輔助設備的選型計算、以及非工藝部分工程概算、技術經濟分析。根據中壓法合成氨繪制了合成車間帶控制點的工藝流程圖，合成塔設備圖，并根據哈爾濱的地理環境設計了合成氨車間布置圖。
關鍵詞 工程概算 中壓法 合成氨
Abstract
The design focuses on the development of synthetic ammonia process status at home and abroad, selected from ammonia in the pressure method. And had ammonia plant material balance, heat balance, major equipment (reactor) is the major auxiliary equipment sizing and selection of calculation, and non-technology part of the project budget, technical and economic analysis. Ammonia under pressure method in the synthesis of the workshop are drawn flow chart with control points, according to the geographical environment in Harbin ammonia plant layout design.
Key words Engineering budget The pressure method Ammonia
目 錄
摘要 I
Abstract II
第一章 緒論 1
1.1應用領域 1
1.2設計目的及意義 1
1.3產品質量指標 2
第二章 工藝簡介及氨合成反應特點 5
2.1工藝發展 5
2.2氨合成反應特點 8
2.3氨合成方法 9
第三章 工藝詳述 11
3.1催化劑的選擇 11
3.2壓力及溫度的選擇 11
3.3合成塔進塔氣體組成 13
3.4氨合成過程的基本工藝 13
3.5氨合成工藝的選擇 15
第四章 工藝計算 17
4.1 設計要求 17
4.2 物料衡算 18
4.2.1 合成塔物料衡算 18
4.2.2氨分離器氣液平衡計算 20
4.2.3冷交換器氣液平衡計算 21
4.2.4液氨貯槽氣液平衡計算 22
4.2.5液氨貯槽物料衡算 24
4.2.6合成系統物料計算 25
4.2.7合成塔物料計算 26
4.2.8水冷器物料計算 27
4.2.9氨分離器物料計算 27
4.2.10循環機前后物料計算 28
4.2.11冷交換器物料計算 28
4.2.12液氨儲槽物料計算 30
4.2.13物料衡算結果匯總 30
4.3 熱量衡算 35
4.3.1合成塔熱量衡算 35
4.3.2廢熱鍋爐能量衡算 38
4.3.3熱交換器能量衡算 39
4.3.4軟水預熱器能量衡算 40
4.3.5水冷卻器和氨分離器能量衡算 41
4.3.6循環壓縮機能量衡算 42
4.3.7冷交換器與氨冷器能量衡算 44
第五章 主要設備設計及選型校核 46
5.1.1氨合成塔設備計算 46
5.1.2廢熱鍋爐設備計算 47
5.1.3主要設備選型匯總表 52
第六章 車間布置 53
第七章 非工藝專業要求 54
7.1公用工程 54
7.1.1電氣照明 54
7.1.2給排水 54
7.1.3通風除塵 55
7.1.4土建 55
7.1.5機修 55
7.1.6崗位定員 55
7.2環境保護及安全衛生 56
7.2.1化學沉淀-A/O工藝處理合成氨廢水 56
7.2.2安全措施 56
7.2.3防毒 57
7.2.4防火 57
7.2.5防爆 58
7.2.6防燒傷 58
7.2.7防觸電 58
7.2.8防機械傷害 59
7.3節能 59
第八章 技術經濟 61
8.1投入資金 61
8.2經濟效益評估 62
結束語 64
致謝 65
參考文獻 66
Contents
Abstract I
Abstract II
Chapter I. Introduction 1
1.1 Applications 1
1.2 The purpose and significance of the design 1
1.3 The quality of products、target 2
Chapter II. Process description and characteristics of ammonia synthesis reaction 5
2.1Technology Development 5
2.2 The characteristics of ammonia synthesis reaction 8
2.3 Ammonia synthesis 9
Chapter III. Process Description 11
3.1 Selection of Catalysts 11
3.2 The selection of pressure and temperature of 11
3.3 The composition of reactor into the gas tower 13
3.4 The basic process for ammonia synthesis process 13
3.5 Selection process for ammonia synthesis 15
Chapter IV. Process Calculation 17
4.1 Design requirements 17
4.2 Material balance of count 18
4.2.1 reactor material balance 18
4.2.2 Calculation of vapor-liquid equilibrium of ammonia separato 20
4.2.3 Calculation of the cold exchanger , vapor-liquid equilibrium 21
4.2.4 Calculation of liquid ammonia tank iquid equilibrium 22
4.2.5 The material balance of liquid ammonia storage tank 24
4.2.6 Calculation of materials synthesis system 25
4.2.7 Calculation of reactor materials 27
4.2.8 Calculation of water coolers materials 27
4.2.9 Calculation of ammonia separator material 28
4.2.10 Calculation of materials before and after machine cycles 28
4.2.11 Calculation of the cold exchanger materials 29
4.2.12 Calculation of liquid ammonia storage tank materials 30
4.2.13 material balance summary of the results 30
4.3 Heat balance 35
4.3.1 reactor heat balance 35
4.3.2 The energy balance of waste heat boiler 38
4.3.3 Heat exchanger energy balance 39
4.3.4 Soft water heater energy balance 40
4.3.5 water coolers and energy balance of ammonia separator 41
4.3.6 cycle energy balance of 67 compressors 42
4.3.7 Cold switches and energy balance of ammonia cooler 44
Chapter V. Checking the design and selection of major equipment 46
5.1.1 Calculation of ammonia equipment 46
5.1.2 Calculation of waste heat boiler equipment 47
5.1.3 Summary of major equipment selection 52
Chapter VI. Plant layout 53
Chapter VII. Non-technology professional requirements of 54
7.1 Uti..
