摘  要
從實踐出發，本論文主要以“華為交換機”為例介紹交換機的基本工作原理，以太網交換技術的一個主要方面是虛擬局域網VLAN，它使用交換機將工作站和服務器聚集在邏輯概念的組中，即是一種通過將局域網內的設備邏輯地，而不是物理的劃分一個網段，從而實現虛擬工作組的技術.內容含蓋了組建局域網，其中主要的知識點如下： 交換機的基本配置和使用，基于VLAN的劃分，基于端口VLAN的配置，以及VLAN之間通過第三層交換機轉發的配置方法，端口TRUNK屬性的相關知識和端口TRUNK屬性的配置步驟，交換機CONSOLE口的配置，以及CONSOLE口的配置的內容和環境，常用的命令的介紹， 利用TELNET登錄交換機的操作步驟。
關鍵詞：交換機，虛擬局域網VLAN，端口TRUNK，交換機CONSOLE口，TELNET，SLIP，拓?fù)浣Y(jié)構，端口配置
 

Abstrsct
From the practice, the paper mainly take "3com switchboard" for the example introducing the switchboard the basicprinciple of work. The ethernet exchange technology principal aspect isvirtual local area network VLAN, it uses the switchboard gathers theworkstation and the server at in the logical concept group, is onekind through the local area network in equipment logic place, but is not a physical division webpage, thus realizes the hypothesized workteam's technology The content contained covers has set up the localarea network, main knowledge as follows: The switchboard basicdisposition and the use, based on the VLAN division, based on the portVLAN disposition, as well as between VLAN the disposition method whichretransmits through the third switchboard, port TRUNK attributerelated knowledge and the port TRUNK attribute disposition step, theswitchboard CONSOLE mouth disposition, as well as the CONSOLE mouthdisposition content and the environment, the commonly used orderintroduction, registers switchboard using TELNET the sequence ofoperation. Key word: Switchboard, virtual local area network VLAN, port TRUNK,switchboard CONSOLE mouth, TELNET, SLIP, topology, port disposition 
Key word: Switchboard, virtual local area network VLAN, port TRUNK,switchboard CONSOLE mouth, TELNET, SLIP, topology, port disposition 
 

前言 1
1交換機的基本配置和使用 2
1.1  交換機概述 2
1.1.1 交換機面板介紹 3
1.1.2交換機基本工作原理 4
1.1.3背景知識 6
1.2.1概述 8
1.2.2 交換機CONSOLE口令和BOOTROM口令的設置與清除 15
1.3交換機CONSOLE口的配置 16
1.3.1操作內容和環境 16
1.3.3實驗常用命令介紹 19
1.4交換機Telnet的配置 21
1.4.1操作內容和環境 21
1.4.2相關知識介紹 21
1.4.3僅使用密碼的交換機TELNET配置 23
1.4.4 使用用戶名和密碼的交換機TELNET配置 24
2交換機VLAN的配置 26
2.1交換機VLAN的端口劃分和配置 26
2.1.1操作內容和環境 26
2.1.2VLAN的劃分 26
2.1.3基于端口的VLAN的配置 27
2.2 組網需求 27
2.2.1 組網圖 27
2.2.3操作內容和環境 28
2.2.4基于端口的VLAN的配置 28
2.5.5配置步驟 29
3交換機靜態路由和動態路由配置 31
3.1 VLAN間靜態路由設置 31
3.1.1VLAN間動態路由的設置 31
3.2華為交換機VLAN典型配置舉例 32
3.2.1配置步驟 32
3.2.2VLAN常見故障的診斷與排除 34
3.2.3創建多個VLAN,并配置虛接口地址 34
3.2.4VLAN間靜態路由設置 35
3.2.5VLAN間動態路由的設置 36
4交換機TRUNK端口屬性配置 37
4.1什么是TRUNK 37
4.1.1交換機端口TRUNK的配置、操作內容和環境 37
4.1.2端口TRUNK屬性相關知識介紹 38
4.2配置步驟 38
畢業設計總結 40
致謝 41
參考文獻目錄 42