摘 要
從1860年起，萊諾依爾發明了大氣內燃機到如今，內燃機經歷了140多年的發展。內燃機自發明以來，一直把提高動力性，改善經濟性以及提高可靠性 和耐久性作為主要研究目標。但是隨著內燃機的保有量及生產量的成倍增加，對環境的污染越來越嚴重，而且由于石油危機導致原油價格成倍增長，這些嚴重的問題給內燃機的研究提出了新的要求，使內燃機的研究目標發生了根本變化。出了提高動力性，改善經濟性以及提高可靠性和耐久性外，影響內燃機設計和運行的主要因素是凈化廢氣、降低噪音降低燃油消耗率和采用多種燃料。
本文以東風4型內燃機為例，設計確定散熱器的結構，傳熱過程的傳熱系數、面積、散熱單節數、冷卻風扇的功率，同時對扁管和圓管進行了計算與比較。
關鍵詞：內燃機 扁管 圓管











Abstract

Since 1860, leno who invented atmospheric engine up to now, experienced 140years of development of internal combustion engine. Internal combustion engine since its invention, has been to increase power, improve the economy and improving the reliability and durability as the main research object. But with the internal combustion engine retains the quantity and production quantity increases exponentially, the environment pollution is more and more serious, and because of the oil crisis caused the oil price twice grows, these serious problems to the research of internal combustion engine has made new demands, the research of internal combustion engine target produced fundamental change. The increased power, improve the economy and improving the reliability and durability of external, internal combustion engine design and operation effect is the main factor for purifying exhaust gas, noise reduction to reduce the fuel consumption rate and using various kinds of fuel.
Taking Dongfeng 4 diesel as an example, the design to determine the structure of the radiator, the heat transfer coefficient, heat transfer area, cooling section number, cooling fan power, at the same time on the flat tube and pipe were calculated and compared.



Key Words: Internal combustion Flat Tube pipe







目 錄


摘 要 …………………………………………………….
Abstract …………………………………………………
一 緒論…………………………………………………….
1.1 課題背景和意義 ……………………………………
1.2國內外研究發展狀況……………………………………
1.3 內燃機冷卻系的作用介紹及分類 ………………
1.4本課程研究的主要內容和任務…………………….
二 內燃機冷卻裝置計算………………………………..
2.1概述………………………………………………….
2.2熱交換器的選取…………………………….
2.3 冷卻水系統………………………………………….
2.4風扇及風機的選取與計算……………………………
2.5本章小結…………………………………………….
三 結論與展望……………………………………………
3.1 結論…………………………………………………..
3.2 展望 …………………………………………………
參考文獻………………………………………………….
致 謝 ……………………………………………………..
附 圖