摘 要
并聯機構的研究是機構學研究的重要方面之一，隨著機加工的要求不斷的提高，以并聯機構為基礎的并聯機床也越來越受到重視。并聯機構的構型很多，每個構型運動特性不盡相同，還有很多深入的工作有待完成。特別是六自由度的機構，運動機理更加復雜，更需要對其基礎理論方面進行深入的研究。文章主要從機構的運動學與參數優化著手、圍繞并聯機構6-PSS的基礎理論進行研究。
主要研究?jī)?nèi)容如下：
1. 對現有的并聯機構進行研究分析，對已經存在并聯機構進行結構改進，提出本文研究對象，并對該機構進行詳細的結構設計。對并聯機構進行位置分析，建立機構的坐標系統，建立其位置正反解的數學模型，基于MATLAB軟件采用基于混沌理論的牛頓迭代法求解出位置的正解值，并正反解的求解結果進行驗證。
2. 對并聯機構進行運動學分析，提出一種新的從支鏈兩端推導速度與加速度的方法，建立速度與加速度數學模型，并對速度與加速度的反解方程進行數值求解。
3. 對并聯機構進行工作空間分析，在位置反解的基礎上進行定姿態條件下的工作空間分析，用MATLAB工具軟件對工作空間進行可視化顯示，并詳盡分析工作空間各個方向切面圖的形狀特性，以及不同尺寸參數對工作空間形狀與大小的影響。
4. 對并聯機構進行尺寸優化，根據機構的結構形式推導出機構的速度數學模型、建立雅可比矩陣，并用范數的形式建立雅可比矩陣條件數的數學模型；對并聯機構進行參數歸一化處理后，以條件數的平均值與波動值的綜合值作為目標建立目標函數、給出約束條件，最后通過數值計算得到機構雅可比矩陣條件數的平均值、波動值曲線和優化目標函數值的曲線圖，優化出最佳參數值。
5. 建立以該并聯機構為基本構架的并聯機床的三維模型，并將三維模型導入到ADAMS軟件里，對其進行運動學仿真，并將仿真結果與前面章節的理論分析結果進行對比分析。最后用MATLAB構建并聯機構性能分析的原型系統，以便于快速方便的對該機構的性能進行分析。

關鍵詞 并聯機構；工作空間；參數優化；運動仿真；雅可比矩陣條件數


Abstract
Parallel mechanism research is an important aspect of mechanism kinematics research. Along with the machining requirements of continuous improvement，parallel machine which based on parallel mechanism has attracted more attention. There are many kinds of configuration and every configuration has it’s own movement characteristics, so there still have a lot of in-depth work remains to be done. Especially six degrees of freedom of organization, it’s movement mechanism was more complex, which need more basic theory research of its characteristics. This article mainly embarks on the research of the kinematics and parameter optimization.
This paper focusing on the theory research of parallel mechanism based on 6-PSS. The main research contents are as follows:
1. Research the existing parallel mechanism,carry on the improvement of structure proposed in this paper to study. And on the agency to detailed structure design, make its structure form more suitable for engineering application. Organization coordinate system of the parallel mechanism positive and negative solutions to its location mathematical modeling was established. MATLAB software was used to solve the position of positive solutions for value by Newton iteration method. And positive and negative solutions results of solving were verified.
2. Parallel mechanism kinematics analysis, this paper proposed a new method of establishing velocity and acceleration mathematical modeling and inverse equation of Speed and acceleration were numerically solved.
3. Working space analysis of parallel mechanism; Work space of the parallel mechanism was analyzed of the posture conditions based on solving inverse solution position equation. Working.space visual display was realized by MATLAB tool software with detailed analysis of each direction cut-side graph shape characteristics of working space and influence of different parameters to the workspace shape and size.
4. Parallel mechanism for size optimization; According to the organization structure forms deduced institutions speed mathematical model and establishment jacobian matrix, then establish jacobian matrix mathematics model of condition number. The parameters of parallel mechanism normalized, establish objective functions with the average of the condition number with fluctuation comprehensive value as a target and give constraint condition. Finally jacobian matrix condition number average values, fluctuation curves values and optimize values of the objective function of graph are calculated by numerical institutions, the optimized optimal parameter values are given out.
5. A 3d model of parallel machine tool was established based on the basic framework of the parallel mechanism. Import the 3d model into the ADAMS software, and carry on the kinematics simulation, and the simulation results with the preceding chapter of theoretical analysis results and the simulation analysis results are compared and analyzed.


Key words Parallel mechanism；Working space；Parameters optimization；Movement simulation；Jacobian matrix condition number


目 錄
摘 要 I
Abstract III
第1章 緒 論 1
1.1 課題研究的意義 1
1.2 并聯機構的發展概述 1
1.2.1 國外并聯機構的發展概況 1
1.2.2 國內并聯機構的發展概況 2
1.2...