艦炮抽殼系統非線性結構.doc
約76頁DOC格式手機打開展開
艦炮抽殼系統非線性結構,摘要炮閂機構是艦炮的重要機構之一，其主要作用是閉鎖炮膛、擊發底火和抽出藥筒。在某中口徑艦炮實際工作過程中發現抽殼系統的動態特性是影響艦炮可靠性的重要因素。針對炮彈發射過程中抽殼系統存在的塑性變形和構件磨損問題，以及抽殼動作不能順利完成現象，在結構動力學理論的基礎上，結合有限元技術分別對藥筒的抽殼力和抽殼系統的結構動力學...
內容介紹
此文檔由會員 違規屏蔽12 發布
摘 要
炮閂機構是艦炮的重要機構之一，其主要作用是閉鎖炮膛、擊發底火和抽出藥筒。在某中口徑艦炮實際工作過程中發現抽殼系統的動態特性是影響艦炮可靠性的重要因素。針對炮彈發射過程中抽殼系統存在的塑性變形和構件磨損問題，以及抽殼動作不能順利完成現象，在結構動力學理論的基礎上，結合有限元技術分別對藥筒的抽殼力和抽殼系統的結構動力學進行特性研究分析，并完成數值模擬。
本文主要研究?jī)?nèi)容有：
1) 在抽殼力的模擬中，首先闡述了炮彈發射和藥筒抽出過程，進行了彈塑性力學分析，并探討了影響抽殼力的因素；然后利用有限元軟件ABAQUS對抽殼力進行數值模擬，并結合實驗驗證了方法的合理性和正確性，為藥筒的改進設計提供了參考。
2) 對抽殼系統的結構動力學分析，論述了抽殼系統的結構及工作原理，應用三維軟件PRO/E和有限元軟件HyperMesh分別建立了某艦炮抽殼系統的實體模型和有限元分析模型；然后運用ABAQUS的顯示算法對模型進行分析研究，揭示了抽殼系統結構的應力分布規律，比較了搖臂磨損前后抽殼系統的動態特性，探討了磨損后對抽殼系統能量和抽殼速度的影響，并針對抽筒子的塑性變形對抽殼系統中的搖臂進行優化，解決了抽筒子塑性變形的問題，確定了搖臂的最佳厚度選擇；最后通過實驗驗證了有限元分析模型的合理性和正確性。
通過實驗和仿真分析相結合對艦炮抽殼系統的非線性結構動力學研究，為抽殼系統的研究提出了一種等效模型，為艦炮構件磨損分析提供一種研究方法，同時也為以后產品的改進設計提供理論和實踐上的支持。
關鍵詞 顯式算法；數值模擬；塑性變形；抽殼系統
Abstract
The breech mechanism is one of the key mechanism of naval gun, which is vital for closed bore, percussion primer and extraction cartridge. In real work, the dynamic characteristics of extractor system were important factor affecting a naval gun’s reliability. Aiming at the problem, which system exist plastic deformation and component abrasion and extraction cartridge action can not be successfully completed after gun fired, on the basis of the theory of structural dynamics and combined with finite element technique, the extracting force and structural dynamics of extractor system were analyzed, the numerical analysis of extracting force were completed.
The main contents of this thesis:
1) In the simulation of extracting force, in the first place, gun fired and extraction process were described, the elastic-plastic mechanics analysis were done and influence factor of extracting force was discussed. Then, with ABAQUS, the numerical analysis of extracting force was performed and the correctness and rationality of method were verified by experiment, it based for dynamics analysis and provided reference for cartridge design.
2) In the analysis of structural dynamics of system, first, the working principle and structure of extractor system were explicate, the solid model and FEA model were build with PRO/E and HyperMesh. Secondly, the FEA model were analyzed by explicit algorithm of ABAQUS, the stress distribution law of system were revealed, the dynamic characteristics of system before and after abrasion were compared, the abrasion was influenced on the energy of system and velocity of extraction. Aiming at plastic deformation of extractor, rocker arm was optimized, the plastic deformation of extractor was resolved and the best thickness choice was confirmed. Finally, through the experiment, the correctness and rationality of method were verified.
Study on nonlinear structural dynamics study of system, which was based on experimental and simulation analysis, proposed an equivalent model for extracting cartridge case system, provided a research method for abrasion analysis of naval gun component and theoretical and practical support for future production improvements.
Keywords explicit algorithm, numerical analysis, plastic deformation, extractor system
目 錄
摘 要 I
Abstract III
第1章 緒論 1
1.1 課題研究的背景及意義 1
1.2 國內外研究現狀 3
1.2.1 火炮動力學 3
1.2.2 炮閂機構 4
1.3 本文主要研究?jī)?nèi)容及章節安排 5
1.3.1 主要研究?jī)?nèi)容 5
1.3.2 章節安排及論文結構框架 5
1.4 本章小結 6
第2章 非線性結構動力學分析理論 7
2.1 有限元法 7
2.1.1 有限元法的基本思想 7
2.1.2 有限元法分析的基本步驟 8
2.2 彈塑性力學理論 9
2.2.1 應變強化模式 9
2.2.2 受內壓的厚壁圓筒理論 10
2.3結構動力學理論基礎 11
2.3.1 結構動力學非線性有限元方程組的求解方法 11
2.3.2 阻尼模型 16
2.4 接觸-碰撞理論 17
2.4.1 摩擦模型 18
2.4.2 ABAQUS中的接觸-碰撞約束 19
2.5本章小結 20
第3章 基于彈塑性理論的抽殼力分析 21
3.1 艦炮炮彈發射與抽殼過程 21
3.2 彈塑性力學分析 22
3.2.1 藥筒貼膛前的力學分析 22
3.2.2 藥筒貼膛后到膛壓達到最大階段的力學分析 24
3.2.3 膛壓下降階段的力學分析 26
3.3 抽殼力影響因素的理論分析 27
3.4 抽殼力的數值模擬 30
3.4.1 建立有限元模型 30
3.4.2 材料定義 30
3.4.3 接觸定義 31
3.4.4 載荷和邊界條件 31
3.4.5 結果分析 32
3.5 抽殼力的實驗驗證 33
3.6本章小結 34
第4章 艦炮抽殼系統有限元模型建立 35
4.1 抽殼系統的工作原理 35
4.2抽殼系統實體模型 36
4.3抽殼系統有限元模型 36
4.3.1 網格劃分 36
4.3.2 阻尼分析 37
4.3.3 抽殼系統各部件間的連接 38
4.3.4 載荷與邊界條件 42
4.4 本章小結 42-..
炮閂機構是艦炮的重要機構之一，其主要作用是閉鎖炮膛、擊發底火和抽出藥筒。在某中口徑艦炮實際工作過程中發現抽殼系統的動態特性是影響艦炮可靠性的重要因素。針對炮彈發射過程中抽殼系統存在的塑性變形和構件磨損問題，以及抽殼動作不能順利完成現象，在結構動力學理論的基礎上，結合有限元技術分別對藥筒的抽殼力和抽殼系統的結構動力學進行特性研究分析，并完成數值模擬。
本文主要研究?jī)?nèi)容有：
1) 在抽殼力的模擬中，首先闡述了炮彈發射和藥筒抽出過程，進行了彈塑性力學分析，并探討了影響抽殼力的因素；然后利用有限元軟件ABAQUS對抽殼力進行數值模擬，并結合實驗驗證了方法的合理性和正確性，為藥筒的改進設計提供了參考。
2) 對抽殼系統的結構動力學分析，論述了抽殼系統的結構及工作原理，應用三維軟件PRO/E和有限元軟件HyperMesh分別建立了某艦炮抽殼系統的實體模型和有限元分析模型；然后運用ABAQUS的顯示算法對模型進行分析研究，揭示了抽殼系統結構的應力分布規律，比較了搖臂磨損前后抽殼系統的動態特性，探討了磨損后對抽殼系統能量和抽殼速度的影響，并針對抽筒子的塑性變形對抽殼系統中的搖臂進行優化，解決了抽筒子塑性變形的問題，確定了搖臂的最佳厚度選擇；最后通過實驗驗證了有限元分析模型的合理性和正確性。
通過實驗和仿真分析相結合對艦炮抽殼系統的非線性結構動力學研究，為抽殼系統的研究提出了一種等效模型，為艦炮構件磨損分析提供一種研究方法，同時也為以后產品的改進設計提供理論和實踐上的支持。
關鍵詞 顯式算法；數值模擬；塑性變形；抽殼系統
Abstract
The breech mechanism is one of the key mechanism of naval gun, which is vital for closed bore, percussion primer and extraction cartridge. In real work, the dynamic characteristics of extractor system were important factor affecting a naval gun’s reliability. Aiming at the problem, which system exist plastic deformation and component abrasion and extraction cartridge action can not be successfully completed after gun fired, on the basis of the theory of structural dynamics and combined with finite element technique, the extracting force and structural dynamics of extractor system were analyzed, the numerical analysis of extracting force were completed.
The main contents of this thesis:
1) In the simulation of extracting force, in the first place, gun fired and extraction process were described, the elastic-plastic mechanics analysis were done and influence factor of extracting force was discussed. Then, with ABAQUS, the numerical analysis of extracting force was performed and the correctness and rationality of method were verified by experiment, it based for dynamics analysis and provided reference for cartridge design.
2) In the analysis of structural dynamics of system, first, the working principle and structure of extractor system were explicate, the solid model and FEA model were build with PRO/E and HyperMesh. Secondly, the FEA model were analyzed by explicit algorithm of ABAQUS, the stress distribution law of system were revealed, the dynamic characteristics of system before and after abrasion were compared, the abrasion was influenced on the energy of system and velocity of extraction. Aiming at plastic deformation of extractor, rocker arm was optimized, the plastic deformation of extractor was resolved and the best thickness choice was confirmed. Finally, through the experiment, the correctness and rationality of method were verified.
Study on nonlinear structural dynamics study of system, which was based on experimental and simulation analysis, proposed an equivalent model for extracting cartridge case system, provided a research method for abrasion analysis of naval gun component and theoretical and practical support for future production improvements.
Keywords explicit algorithm, numerical analysis, plastic deformation, extractor system
目 錄
摘 要 I
Abstract III
第1章 緒論 1
1.1 課題研究的背景及意義 1
1.2 國內外研究現狀 3
1.2.1 火炮動力學 3
1.2.2 炮閂機構 4
1.3 本文主要研究?jī)?nèi)容及章節安排 5
1.3.1 主要研究?jī)?nèi)容 5
1.3.2 章節安排及論文結構框架 5
1.4 本章小結 6
第2章 非線性結構動力學分析理論 7
2.1 有限元法 7
2.1.1 有限元法的基本思想 7
2.1.2 有限元法分析的基本步驟 8
2.2 彈塑性力學理論 9
2.2.1 應變強化模式 9
2.2.2 受內壓的厚壁圓筒理論 10
2.3結構動力學理論基礎 11
2.3.1 結構動力學非線性有限元方程組的求解方法 11
2.3.2 阻尼模型 16
2.4 接觸-碰撞理論 17
2.4.1 摩擦模型 18
2.4.2 ABAQUS中的接觸-碰撞約束 19
2.5本章小結 20
第3章 基于彈塑性理論的抽殼力分析 21
3.1 艦炮炮彈發射與抽殼過程 21
3.2 彈塑性力學分析 22
3.2.1 藥筒貼膛前的力學分析 22
3.2.2 藥筒貼膛后到膛壓達到最大階段的力學分析 24
3.2.3 膛壓下降階段的力學分析 26
3.3 抽殼力影響因素的理論分析 27
3.4 抽殼力的數值模擬 30
3.4.1 建立有限元模型 30
3.4.2 材料定義 30
3.4.3 接觸定義 31
3.4.4 載荷和邊界條件 31
3.4.5 結果分析 32
3.5 抽殼力的實驗驗證 33
3.6本章小結 34
第4章 艦炮抽殼系統有限元模型建立 35
4.1 抽殼系統的工作原理 35
4.2抽殼系統實體模型 36
4.3抽殼系統有限元模型 36
4.3.1 網格劃分 36
4.3.2 阻尼分析 37
4.3.3 抽殼系統各部件間的連接 38
4.3.4 載荷與邊界條件 42
4.4 本章小結 42-..
