在線式ups.doc
約83頁DOC格式手機打開展開
在線式ups,摘要隨著科學技術的高速發展和人們生活水平的不斷提高，不間斷電源（ups）在日常生活中應用越來越廣泛，各行各業對ups的性能要求也越來越高。近年來，微處理器性能的不斷提高及其外圍電子器件的不斷發展，使得ups的數字控制技術逐漸完善，并將逐步取代模擬控制實現ups的控制功能。目前ups的數字控制技術常采用mcu和dsp作為...
內容介紹
此文檔由會員 違規屏蔽12 發布
摘 要
隨著科學技術的高速發展和人們生活水平的不斷提高，不間斷電源（UPS）在日常生活中應用越來越廣泛，各行各業對UPS的性能要求也越來越高。近年來，微處理器性能的不斷提高及其外圍電子器件的不斷發展，使得UPS的數字控制技術逐漸完善，并將逐步取代模擬控制實現UPS的控制功能。目前UPS的數字控制技術常采用MCU和DSP作為控制核心，由于電子半導體器件不斷地向高頻、高效及智能化方向發展，這種控制方法往往不能完全滿足UPS的性能要求。
近幾年，大規模集成電路的迅速發展，現場可編程門陣列(FPGA)集成度更高、速度更快和價位更低，在信號與信息處理領域的應用越來越廣泛。與DSP、單片機相比，F(xiàn)PGA器件具有更高的處理速度和可靠性，并且可編程邏輯器件有設計靈活、集成度高、設計周期短等突出優點，因此本文將其應用于UPS控制系統中以滿足高性能的應用需求。
本文首先簡要介紹了在線式UPS的整體設計方案及FPGA的結構、優越性及其開發過程，其次論述了模糊PID控制和SPWM的基本原理以及它們的實現方法。針對數字PID動態性能差、控制靈活度低等缺點，本文引入模糊PID控制，這種控制算法結合了模糊控制調節速度快和PID控制穩態性能好的優點，將其應用到UPS控制系統中，提高逆變器的性能。在設計中，本文運用MATLAB對所涉及到的算法進行分析，并通過Matlab/Simulink工具箱對在線式UPS整個系統進行設計仿真。在本文的工作中，采用DSP Builder對正弦信號發生器、SPWM控制器和模糊PID控制器等進行設計，并轉換生成VHDL語言，然后在Quartus II開發軟件中編譯仿真下載驗證。通過具體的仿真分析及實驗驗證，證實了模糊PID控制應用的可行性以及FPGA控制器應用于在線式UPS控制系統中的優越性，同時也驗證了本方案設計的正確性。
關鍵詞 不間斷電源；逆變器；模糊PID控制；FPGA
Abstract
With modern science rapid development and people living standard rise ceaselessly, the uninterrupted power supply (UPS) is applied widely in daily life, the performance requirements of UPS are higher and higher in the meantime. In recent years, with the continuous improvement of microprocessor performance and the continuous development of peripheral electronic devices, the UPS digital control technology has been further improved, and gradually replace the analog control to achieve UPS control functions. At present the digital control technology of UPS often adopted MCU and DSP as control core, Since electronic semiconductor devices are developing in the direction of high frequency, high efficiency and intelligent continuously,this control method often cannot meet the performance requirements of UPS completely.
In recent years, the rapid development of large-scale integrated circuits makes Field-programmable logic devices (FPGA) integration higher, speed faster and price lower. And FPGA is used in signal and information processing fields more widely. Compared with DSP and single-chip microcomputer, FPGA and complex programable logic device (CPLD) have higher processing speed and reliability. FPGA has the advantages of flexible design, high integration, high speed, and short design cycle, so in this thesis, FPGA was used in UPS control system to meet the application requirements with high performance.
Firstly, this thesis introduced the overall design scheme of UPS, and the structure, advantages and development process of FPGA. Secondly, it discussed the fuzzy proportion integration differentiation (PID) control, the basic principle of SPWM and the realization method. Because digital PID has the disadvantages of poor dynamic performance and it is not quite well in the control flexibility, this thesis selected the Fuzzy-PID control. This control algorithm combines the advantages of high fuzzy control regulation speed and good PID control steady performance. Its application in UPS control system improved the inverter performance. In the design, it used MATLAB tools to analyze the algorithm involved in the thesis. And it used the MATLAB/Simulink toolbox to design simulation of the whole system of UPS. In addition, this thesis used DSP Builder to design the sine signal generator, SPWM controller and Fuzzy PID controller, and it generated VHDL language. And then it used Quartus II to compile, simulation and download validation. Through the simulation analysis and experimental verification, it confirmed the application feasibility of Fuzzy-PID control and the superiority of the FPGA controller application in UPS control system. What’s more, it also validated the correctness of the design in this thesis.
Keywords UPS; Inverter; Fuzzy-PID control; FPGA
目 錄
摘 要 I
Abstract III
第1章 緒論 1
1.1 UPS概述 1
1.2 國內外現狀和發展方向 2
1.2.1 國內外研究動態 2
1.2.2 發展趨勢 3
1.3 課題研究的目的和意義 3
1.4 課題研究的內容與方法 5
第2章 總體設計方案及相關原理 6
2.1 在線式UPS總體設計 6
2.1.1 在線式UPS 結構 6
2.1.2 在線式UPS的工作原理 7
2.2 控制方法的選擇 8
2.2.1 相關控制方法 8
2.2.2 FPGA簡介 9
2.3 SPWM技術 15
2.3.1 SPWM基本原理 15
2.3.2 SPWM調制方式 16
2.4 控制策略 18
2.4.1 UPS各種數字化控制策略綜述 18
2.4.2 PID控制 20
2.4.3 模糊控制 22
2.4.4 Fuzzy-PID控制 25
2.5 本章小結 28
第3章 UPS系統硬件設計 29
3.1 主電路 29
3.1.1 整流..
隨著科學技術的高速發展和人們生活水平的不斷提高，不間斷電源（UPS）在日常生活中應用越來越廣泛，各行各業對UPS的性能要求也越來越高。近年來，微處理器性能的不斷提高及其外圍電子器件的不斷發展，使得UPS的數字控制技術逐漸完善，并將逐步取代模擬控制實現UPS的控制功能。目前UPS的數字控制技術常采用MCU和DSP作為控制核心，由于電子半導體器件不斷地向高頻、高效及智能化方向發展，這種控制方法往往不能完全滿足UPS的性能要求。
近幾年，大規模集成電路的迅速發展，現場可編程門陣列(FPGA)集成度更高、速度更快和價位更低，在信號與信息處理領域的應用越來越廣泛。與DSP、單片機相比，F(xiàn)PGA器件具有更高的處理速度和可靠性，并且可編程邏輯器件有設計靈活、集成度高、設計周期短等突出優點，因此本文將其應用于UPS控制系統中以滿足高性能的應用需求。
本文首先簡要介紹了在線式UPS的整體設計方案及FPGA的結構、優越性及其開發過程，其次論述了模糊PID控制和SPWM的基本原理以及它們的實現方法。針對數字PID動態性能差、控制靈活度低等缺點，本文引入模糊PID控制，這種控制算法結合了模糊控制調節速度快和PID控制穩態性能好的優點，將其應用到UPS控制系統中，提高逆變器的性能。在設計中，本文運用MATLAB對所涉及到的算法進行分析，并通過Matlab/Simulink工具箱對在線式UPS整個系統進行設計仿真。在本文的工作中，采用DSP Builder對正弦信號發生器、SPWM控制器和模糊PID控制器等進行設計，并轉換生成VHDL語言，然后在Quartus II開發軟件中編譯仿真下載驗證。通過具體的仿真分析及實驗驗證，證實了模糊PID控制應用的可行性以及FPGA控制器應用于在線式UPS控制系統中的優越性，同時也驗證了本方案設計的正確性。
關鍵詞 不間斷電源；逆變器；模糊PID控制；FPGA
Abstract
With modern science rapid development and people living standard rise ceaselessly, the uninterrupted power supply (UPS) is applied widely in daily life, the performance requirements of UPS are higher and higher in the meantime. In recent years, with the continuous improvement of microprocessor performance and the continuous development of peripheral electronic devices, the UPS digital control technology has been further improved, and gradually replace the analog control to achieve UPS control functions. At present the digital control technology of UPS often adopted MCU and DSP as control core, Since electronic semiconductor devices are developing in the direction of high frequency, high efficiency and intelligent continuously,this control method often cannot meet the performance requirements of UPS completely.
In recent years, the rapid development of large-scale integrated circuits makes Field-programmable logic devices (FPGA) integration higher, speed faster and price lower. And FPGA is used in signal and information processing fields more widely. Compared with DSP and single-chip microcomputer, FPGA and complex programable logic device (CPLD) have higher processing speed and reliability. FPGA has the advantages of flexible design, high integration, high speed, and short design cycle, so in this thesis, FPGA was used in UPS control system to meet the application requirements with high performance.
Firstly, this thesis introduced the overall design scheme of UPS, and the structure, advantages and development process of FPGA. Secondly, it discussed the fuzzy proportion integration differentiation (PID) control, the basic principle of SPWM and the realization method. Because digital PID has the disadvantages of poor dynamic performance and it is not quite well in the control flexibility, this thesis selected the Fuzzy-PID control. This control algorithm combines the advantages of high fuzzy control regulation speed and good PID control steady performance. Its application in UPS control system improved the inverter performance. In the design, it used MATLAB tools to analyze the algorithm involved in the thesis. And it used the MATLAB/Simulink toolbox to design simulation of the whole system of UPS. In addition, this thesis used DSP Builder to design the sine signal generator, SPWM controller and Fuzzy PID controller, and it generated VHDL language. And then it used Quartus II to compile, simulation and download validation. Through the simulation analysis and experimental verification, it confirmed the application feasibility of Fuzzy-PID control and the superiority of the FPGA controller application in UPS control system. What’s more, it also validated the correctness of the design in this thesis.
Keywords UPS; Inverter; Fuzzy-PID control; FPGA
目 錄
摘 要 I
Abstract III
第1章 緒論 1
1.1 UPS概述 1
1.2 國內外現狀和發展方向 2
1.2.1 國內外研究動態 2
1.2.2 發展趨勢 3
1.3 課題研究的目的和意義 3
1.4 課題研究的內容與方法 5
第2章 總體設計方案及相關原理 6
2.1 在線式UPS總體設計 6
2.1.1 在線式UPS 結構 6
2.1.2 在線式UPS的工作原理 7
2.2 控制方法的選擇 8
2.2.1 相關控制方法 8
2.2.2 FPGA簡介 9
2.3 SPWM技術 15
2.3.1 SPWM基本原理 15
2.3.2 SPWM調制方式 16
2.4 控制策略 18
2.4.1 UPS各種數字化控制策略綜述 18
2.4.2 PID控制 20
2.4.3 模糊控制 22
2.4.4 Fuzzy-PID控制 25
2.5 本章小結 28
第3章 UPS系統硬件設計 29
3.1 主電路 29
3.1.1 整流..
