35kV變電站典型設計-戶內站電氣部分設計

摘   要
電能是現代工業生產的主要能源和動力，電能既易于由氣壓形式的能量轉換而來，又易于轉換為其他的能量形式。如果對變配電系統進行一個完善的規劃，能很好地節約資金、合理規劃用地、降低電能損耗、提高電壓質量、保證系統的正常運行。工廠供電設計是整個工廠設計的重要組成部分，工廠供電設計的質量影響到工廠的生產及其發展，作為從事工廠供電工作的人員，有必要了解和掌握工廠供電設計的有關知識，以便適應設計工作的需要。
論文以設計手冊的負荷要求為依據，以變電站的最佳運行方式為前提，按照有關規范，完成了滿足供電要求的初步設計。
 本次設計首先從國家變電站典型設計-35kV戶內站設計中選取兩套方案，比較兩方案的技術指標和經濟指標，從而擇出最優方案。然后根據最終方案進行一次側電氣系統設計和二次側電氣系統設計。一次系統包括的內容有負荷計算、短路電流計算、一次電氣設備選型與校驗、導線選擇、防雷保護。二次系統包括的內容有：繼電保護和電能計量。
關鍵詞：負荷計算、主接線設計、短路電流、設備選擇、繼電保護
 
The typical design of 35kV substation - electrical part of indoor station

Abstract

Electricity is a major source of energy and power of modern industrial production, electricity is both easy to come by the pressure in the form of energy conversion, they are readily convertible to other forms of energy. If you change the power distribution system planning can save money, rational planning of land use, reduce energy loss and improve voltage quality to ensure the normal operation of the system. The factory power supply design is an important part of the entire plant design, the quality of the factory power supply design affect the factory's production and development of personnel engaged in the work of the factory power supply, it is necessary to understand and master the relevant knowledge of the factory power supply design, in order to adapt to the needs of the design work.
The design manual is based on the load requirements, to the best operating way for the substation premises, in accordance with the relative specifications, and completes the preliminary design.
The design is first of all select two options from the typical design of the national substation 35kV indoor station design, and compare the two programs of technical indicators and economic indicators, in order to choose the best plan. The primary electrical system design and the secondary side of the electrical system design based on the final plan. The contents of a system including load calculations, short circuit current calculation, electrical equipment selection and calibration, wire selection, lightning protection. The secondary system includes: protection and energy metering.
Keywords：load calculation, the main wiring design, short-circuit current,         equipment selection, relay protection

第一章 引言 1
1.1 典型設計背景 1
1.2 典型設計國內外發展趨勢 1
1.3 典型設計的意義 1
第二章 負荷計算與無功功率補償 2
2.1 負荷計算的意義 2
2.2 負荷的計算方法 2
2.3 無功補償計算 4
第三章 一次側電氣系統設計 6
3.1 電氣主接線設計 6
3.1.1 電氣主接線的概念 6
3.1.2主接線的設計依據 6
3.1.3 主接線設計的基本要求 7
3.1.4 主接線方案的比較 8
3.1.5 變電所供配電電壓的選擇 8
3.1.6 變電所電氣主接線設計 9
3.1.7 站用變壓器選擇 9
3.2 短路計算 10
3.2.1 短路計算的意義 10
3.2.2 短路計算步驟及分析 10
3.3 電氣設備選擇 13
3.3.1 斷路器的選擇 13
3.3.2 隔離開關的選擇 15
3.3.3 熔斷器選擇 15
3.3.4 電壓互感器的選擇 16
3.3.5 電流互感器的選擇 17
3.4 母線與各電壓等級出線選擇 19
3.4.1 6kV母線的選擇 19
3.4.2 35kV線路導線的選擇 20
3.4.3 6kV出線的選擇 21
3.5 防雷保護 26
3.5.1 避雷器的基本原理 26
3.5.2 避雷器的設置 26
3.5.3 避雷器設置設計 26
第四章 二次側電氣系統設計 27
4.1 繼電保護 27
4.1.1 變壓器故障類型 27
4.1.2 35kV主變壓器保護 27
4.1.3 6kV出線保護 29
4.2 電能的測量與計算 30
結論 32
參考文獻 33
致謝 34
聲明 35
附錄 36
附錄1：原始資料 36
附錄2: 電氣主接線圖 39