目錄
摘要……………………………………………………………………...1
Abstract………………………………………………………………….2
1引言……………………………………………………………………3
2設計方案及選擇………………………………………………………4
2.1設計方案………………………………………………………………………..4
2.2方案選擇………………………………………………………………………..4
3水塔水位系統PLC硬件設計……………………………………………….5
3.1PLC邏輯控制器………………………………………………………………..5
3.1.1可編程控制器的產生及發展………………………………………………5
3.1.2PLC基本結構………………………………………………………………6
3.1. 3LC的特點…………………………………………………………………..8
3.1.4LC工作原理………………………………………………………………..9
3.2要求獨立完成水塔水位控制PLC系統設計與調試…………………………11
3.3位系統控制電路……………………………………………………………….12
3.4輸入/輸出分配…………………………………………………………………12
3.4.1列出水塔水位控制系統PLC的輸入/輸出接口分配表…………………12
3.4.2系統的輸入/輸出設備…………………………………………………….13
4塔水位控制系統PLC軟件設計……………………………………………13
4.1工作過程……………………………………………………………………….13
4.2程序流程圖…………………………………………………………………….14
4.3梯形圖………………………………………………………………………….15
4.4 水塔水位控制系統梯形圖的對應指令表……………………………………16
5總結……………………………………………………………………17
參考文獻、資料……………………………………………………………………..18
致謝…………………………………………………………………………………..19

摘要
在工農業生產過程中，經常需要對水位進行測量和控制。水位控制在日常生活中應用也相當廣泛，比如水塔、地下水、水電站等情況下的水位控制。而水位檢測可以有多種實現方法，如機械控制、邏輯電路控制、機電控制等。本文采用PLC邏輯控制器進行主控制安裝一個自動測水位裝置。利用水的導電性連續地全天候地測量水位的變化，把測量到的水位變化轉換成相應的電信號，主控臺應用MCGS組態軟件對接收到的信號進行數據處理，完成相應的水位顯示、故障報警信息顯示、實時曲線和歷史曲線的顯示，使水位保持在適當?shù)奈恢谩?/p>

[關鍵詞] ： 水位控制、PLC邏輯控制器、菱PLC fx2n

Abstract

In the industrial and agricultural production process, often need to measure and control the water level. Water level control in daily life are very wide application, such as water tower, groundwater, hydropower station of water level control. And the water level detection can have a variety of realization method, such as mechanical control, logic circuit control, mechanical and electrical control, etc. In this paper, the PLC control, the installation of a water tank automatic water level measurement device. The conductivity of the water is used for measuring the change of water level to round-the-clock, to measure the change of water level converted into electrical signal, ZhuKongTai application MCGS software docking received signal data processing, complete the corresponding level display, fault alarm information display, real-time curves and history of the curve shows, to bring the level remain in place.

 [key words] : water level control, mitsubishi PLC fx2n