畢業設計 自動化立體倉庫系統.doc
約63頁DOC格式手機打開展開
畢業設計 自動化立體倉庫系統,自動化立體倉庫系統全文63頁 約33000字論述翔實圖文并茂 摘要自動化立體倉庫系統（automated storage and retrieval system shorted for as/rs）是現代物流系統的一個重要組成部分，廣泛應用于各行各業中。目前，它已經成為企業生產和管理信息化的標志之一。本文在立體倉庫的...
內容介紹
此文檔由會員 癡狂少年 發布
自動化立體倉庫系統
全文63頁 約33000字 論述翔實 圖文并茂
摘 要
自動化立體倉庫系統（Automated Storage and Retrieval System shorted for AS/RS）是現代物流系統的一個重要組成部分，廣泛應用于各行各業中。目前，它已經成為企業生產和管理信息化的標志之一。本文在立體倉庫的規劃設計方面提供了利用仿真輔助設計的方法，對提高立體倉庫作業的效率，合理配置立體倉庫的物流設備，以及檢驗整個流程設計的合理性有著很大的實際應用價值。
本文內容分為以下四個部分：
第一部分是立體倉庫的構成特點和功能。還有立體倉庫的設計原則和步驟，是以下幾個部分的研究基礎，這部分內容主要體現在第1章。第一部分是對PLC的介紹，主要體現在第2章。第三部分是立體倉庫的設計階層，闡述了自動化立體倉庫的仿真與建模理論，介紹了基于三菱PLC所設計的立體倉庫的功能及控制原理，主要體現在第3章。第四部分是步進電機及其驅動器，介紹了步進電機的選型和其驅動器的工作原理及其型號。主要體現在第4章。
此次設計的效果可以改變參數輸入，通過模擬生產情況及波動對系統造成的沖擊，從而避免了在理想化狀態下系統設計所無法預料的各種因素，對系統的堵塞有著形象和直觀的解決方案。
總之，立體倉庫因其較小的占地面較佳空間利用率，應用正逐漸普及。為滿足現代化生產和流通的需要，就必須采取以計算機控制主要手段的自動化立體倉庫。
關鍵詞：立體倉庫；PLC；物流
Abstract
AS/RS (Automated Storage and Retrieval System shorted for AS/RS) is an important part of modern material flow system and is widely applied to every walk of life.Presently it has become one of the signs in enterprise production automation and management information. This article puts forward the way to design and layout AS/RS assisted by computer simulation ,and it has very great practical application value to improve the operation efficient of the stereoscopic warehouse ,to distribute the logistics equipments of that warehouse rationally, and to test the whole design of the Material flow and Information flow.
The content of the article is composed of the follow four parts:
The first part, which is the basis of the study, concludes the statement of the structure of AS/RS, the characteristic of AS/RS, the function of the AS/RS and the principle and step of design. The first part is explained in the chapter one. The second part, which is the introduced of PLC. The second part is explained in the chapter two. The third part, which is the study of theory of design of AS/RS. expatiates on the theory of simulation and modeling, introduces the objects and modeling, and introduces the functions of the AS/RS which design of PLC. The third part is explained in the chapter three. The fourth part is introduces of stepper motor and actuator about type and Principle, The fourth part is explained in the chapter four.
We can alse see the place where the block and bottle-neck have taken place and state how they develop, reflecting by the system of simulation. By changing the input of the parameters and simulating the process of production and the impulsion of system arosed by flactuation, we can avoid various unforeseen factors of system design in the state of idealization, have visual and intuitionistic solving way for the block of the system..
In conclusion, The application of automatic warehouse with less floor space and better space utilization ratio has been popularizing gradually. To meet the requirement of the modern production and negotiation, it should use the warehouse with the computer control technology
Key Words: AS/RS; PLC；Logistics
目 錄
引 言
第1章 概述
1.1自動化立體倉庫的發展情況概述
1.2自動化立體倉庫的發展過程及其發展趨勢
第2章 可編程控制器的介紹
2. 1 PLC的功能簡述
2.2 PLC的優勢
2.3 PLC的分類
2.4 PLC的選型
25 三菱FX系列PLC簡介
2.5.1 FX2, FX2C系列PLC
2.5.2 FX2N系列PLC
第3章 立體倉庫的設計
3.1 立體倉庫的系統功能及特點
3.2 立體倉庫的設計原則及設計過程
3.3 立體倉庫的基本組成
3.4 立體倉庫的控制系統的設計
3.4.1/O分配與功能
3.4.2控制系統設計
3.4.3直流電機的控制
3.4.4譯碼器與LED顯示器
第4章 步進電機及其驅動器
4.1 步進電機驅動器
4.2 步進電機
4.2.1 步進電機選型
4.2.2 步進電機控制
4.3 步進電機轉速和轉向的檢測
第5章 結論
參考文獻
致謝
附錄A
附錄B
附錄C
部分參考文獻
［9］郁漢琪郭健. 可編程序控制器原理及應用.[M]北京：中國電力出版社，2005
［10］郁漢琪. 電氣控制與可編程序控制器應用技術.[M]北京：東南大學出版社，2003
［11］陳盅華.可編程序控制器與工業自動化系統.[M]北京：機械工業出版社，2006
［12］MCGS用戶指南.[M]北京：北京昆侖通態自動化軟件科技有限公司
全文63頁 約33000字 論述翔實 圖文并茂
摘 要
自動化立體倉庫系統（Automated Storage and Retrieval System shorted for AS/RS）是現代物流系統的一個重要組成部分，廣泛應用于各行各業中。目前，它已經成為企業生產和管理信息化的標志之一。本文在立體倉庫的規劃設計方面提供了利用仿真輔助設計的方法，對提高立體倉庫作業的效率，合理配置立體倉庫的物流設備，以及檢驗整個流程設計的合理性有著很大的實際應用價值。
本文內容分為以下四個部分：
第一部分是立體倉庫的構成特點和功能。還有立體倉庫的設計原則和步驟，是以下幾個部分的研究基礎，這部分內容主要體現在第1章。第一部分是對PLC的介紹，主要體現在第2章。第三部分是立體倉庫的設計階層，闡述了自動化立體倉庫的仿真與建模理論，介紹了基于三菱PLC所設計的立體倉庫的功能及控制原理，主要體現在第3章。第四部分是步進電機及其驅動器，介紹了步進電機的選型和其驅動器的工作原理及其型號。主要體現在第4章。
此次設計的效果可以改變參數輸入，通過模擬生產情況及波動對系統造成的沖擊，從而避免了在理想化狀態下系統設計所無法預料的各種因素，對系統的堵塞有著形象和直觀的解決方案。
總之，立體倉庫因其較小的占地面較佳空間利用率，應用正逐漸普及。為滿足現代化生產和流通的需要，就必須采取以計算機控制主要手段的自動化立體倉庫。
關鍵詞：立體倉庫；PLC；物流
Abstract
AS/RS (Automated Storage and Retrieval System shorted for AS/RS) is an important part of modern material flow system and is widely applied to every walk of life.Presently it has become one of the signs in enterprise production automation and management information. This article puts forward the way to design and layout AS/RS assisted by computer simulation ,and it has very great practical application value to improve the operation efficient of the stereoscopic warehouse ,to distribute the logistics equipments of that warehouse rationally, and to test the whole design of the Material flow and Information flow.
The content of the article is composed of the follow four parts:
The first part, which is the basis of the study, concludes the statement of the structure of AS/RS, the characteristic of AS/RS, the function of the AS/RS and the principle and step of design. The first part is explained in the chapter one. The second part, which is the introduced of PLC. The second part is explained in the chapter two. The third part, which is the study of theory of design of AS/RS. expatiates on the theory of simulation and modeling, introduces the objects and modeling, and introduces the functions of the AS/RS which design of PLC. The third part is explained in the chapter three. The fourth part is introduces of stepper motor and actuator about type and Principle, The fourth part is explained in the chapter four.
We can alse see the place where the block and bottle-neck have taken place and state how they develop, reflecting by the system of simulation. By changing the input of the parameters and simulating the process of production and the impulsion of system arosed by flactuation, we can avoid various unforeseen factors of system design in the state of idealization, have visual and intuitionistic solving way for the block of the system..
In conclusion, The application of automatic warehouse with less floor space and better space utilization ratio has been popularizing gradually. To meet the requirement of the modern production and negotiation, it should use the warehouse with the computer control technology
Key Words: AS/RS; PLC；Logistics
目 錄
引 言
第1章 概述
1.1自動化立體倉庫的發展情況概述
1.2自動化立體倉庫的發展過程及其發展趨勢
第2章 可編程控制器的介紹
2. 1 PLC的功能簡述
2.2 PLC的優勢
2.3 PLC的分類
2.4 PLC的選型
25 三菱FX系列PLC簡介
2.5.1 FX2, FX2C系列PLC
2.5.2 FX2N系列PLC
第3章 立體倉庫的設計
3.1 立體倉庫的系統功能及特點
3.2 立體倉庫的設計原則及設計過程
3.3 立體倉庫的基本組成
3.4 立體倉庫的控制系統的設計
3.4.1/O分配與功能
3.4.2控制系統設計
3.4.3直流電機的控制
3.4.4譯碼器與LED顯示器
第4章 步進電機及其驅動器
4.1 步進電機驅動器
4.2 步進電機
4.2.1 步進電機選型
4.2.2 步進電機控制
4.3 步進電機轉速和轉向的檢測
第5章 結論
參考文獻
致謝
附錄A
附錄B
附錄C
部分參考文獻
［9］郁漢琪郭健. 可編程序控制器原理及應用.[M]北京：中國電力出版社，2005
［10］郁漢琪. 電氣控制與可編程序控制器應用技術.[M]北京：東南大學出版社，2003
［11］陳盅華.可編程序控制器與工業自動化系統.[M]北京：機械工業出版社，2006
［12］MCGS用戶指南.[M]北京：北京昆侖通態自動化軟件科技有限公司
