水電站畢業設計論文

摘 要
本次畢業設計的主要任務是根據原始資料進行一個發電廠主接線的初步設計，并對其一次設備進行選擇,進而對繼電保護進行規劃和對配電裝置進行規劃。設計主要內容包括：電氣主接線設計、短路電流計算、主要電氣設備選擇、校驗及配電裝置初步設計和繼電保護的規劃等。主要的電氣設備選擇有：主變壓器、高壓廠用變壓器、高壓斷路器、隔離開關、電流互感器、電壓互感器、避雷器及母線等的選擇。
電氣主接線是發電廠的主要環節，故本文對數個電氣主接線方案進行了技術經濟綜合比較，確定了一個較佳方案，并根據此方案對全廠電氣設備的選擇、配電裝置的布置、繼電保護的規劃等，進行了詳細的設計和說明。本設計包括六部分：電氣主接線選擇，電氣設備選擇，短路電流計算，配電裝置規劃，繼電保護規劃及其整定。
關鍵詞：發電廠； 主接線； 短路電流； 電氣設備； 配電裝置； 繼電保護
 
ABSTRACT
This graduation project topic is s according to the first hand information designs a electric power plant, and mainly carries on the design to its equipment. Then design the power distribution equipment and relay protection planning. Designs the main content to include: The electrical host wiring design, the wiring design, the short-circuit current computation, the main electrical equipment choice , the verification and the power distribution equipment preliminary design and relay protection planning and so on. The main choice electrical equipment includes: The main transformer, the high-pressured factory use the transformer, the high-pressured circuit breaker, the isolator, the current transformer ,the voltage transformer, the arrester and the generatrix and so on.
Main electrical scheme is the main part of substation, so this thesis synthetically compares several main electrical schemes from technical and economic aspects and picks up one preferable scheme. According to the chosen scheme, detailed design and instruction are carried out about the electric apparatus selection, distribution equipment arrangement, relay protection, and so forth.This thesis consist of six parts：main electrical scheme select，main choice electrical equipment，short-circuit current calculation，distribution equipment arrangement, relay protection and verification on the selection short dot.
Key words: electric power plant; electrical main wiring; short-circuit current; electrical equipment; the power distribution equipment; relay protection

 
目錄
1 前言 1
1.1 設計要求 1
1.2 設計依據 1
2 電氣主接線設計 2
2.1 電氣主接線概述 2
2.2 發電機出口接線形式的選擇 2
2.3 220KV側接線形式的選擇 4
3 主變及廠用變的選擇 8
3.1 變壓器選擇概述 8
3.2 主變選擇 8
3.3 廠用變選擇 9
4 短路電流計算 10
4.1 短路點的選取 10
4.2 三相對稱短路計算 10
4.3 不對稱短路計算 15
5 電氣設備的選擇 20
5.1 斷路器的選擇 20
5.2 隔離開關的選擇 24
5.3 母線的選擇 27
5.4 電流互感器的選擇 32
5.5 電壓互感器的選擇 36
5.6 絕緣子和穿墻套管的選擇 39
5.7 高壓熔斷器的選擇 41
5.8 發電機中性點接地設備的選擇 42
5.9 避雷器的選擇 43
5.10 廠用電高壓側電氣設備的選擇 44
6 繼電保護規劃 48
6.1 繼電保護概述 48
6.2 變壓器縱差保護計算 50
7 配電裝置規劃 53
7.1 配電裝置概述 53
7.2 配電裝置設計 54
總結 57
致謝 58
參考文獻 59
附錄 60