畢業論文標準WORD格式排版 45頁 附裝配圖.dwg 凸模.dwg 凹模.dwg等相關文件

摘要
　 隨著塑料工業的發展，塑料注射模已經成為制造塑料制品的主要手段之一。本文主要介紹了塑料注射模設計的方法及過程。首先，介紹了塑料注射模設計與制造在社會發展過程中所處的地位和作用，并對塑料制品（汽車煙灰缸蓋）的結構進行了分析和適當?shù)男薷?，然后介紹了塑料注射模具的具體設計過程。具體設計內容包括：注射機型號的選擇、分型面的確定、抽芯機構及頂出機構設計、成型零部件的設計、澆注系統、冷卻系統和復位系統的設計，此外，還對塑料注射模其他零部件進行了簡單的設計。最后闡述了完成此次設計之后的心得，并對以后的模具設計思路提出了自己的見解和看法。

關鍵詞：注射模設計 模具 塑料

Abstract
With the development of the plastic industry, the plastic injecting mold has already become one of the mainly ways of making the plastic ware. This paper mainly introduces the method and the process of the injecting mold designing. First, It has introduced the position and function in the developing society of the plastic injecting mold’s making and designing, and analysied the structure of the plastic product ,and also modified some parts of the structure .Next, this paper introduce the concrete process of the plastic mold’s designing. according to the actual designing plastic, carried on the analysis and modifications of the plastic product’s structure craft, the next chapter introduced the concrete design process of the plastic injecting mold.The injecting machine was chosen according to the product’s weight,the face was chosen according to the structure of the plastics and model the type of cent of the craft、taking out the organization of core and the outing organizations、noting system、cooling system and resetting the system to carry on the detailed design towards modeling zero parts and sprinkling at the same time。In addition, return to design of plastics injected other zero parts of mold to carry on the simple design, the insight was elaborating in the end of the paper, and the later designing way of the injecting mold was put forward my views and viewpoints.
Key words: injecting mold design mold plastic

目錄
摘要I
ABSTRACTII
第1章緒論6
1.1儀饘及塑料工業的發展情況6
1.2選題的依據和背景6
1.3儀饘Ⅵ國內的發展?fàn)顩r6
1.4儀饘Ⅵ國外的發展?fàn)顩r7
1.5未來的發展趨勢7
1.6畢業設計內容概述7
1.7本章小結7
第2章琀卥方案論證8
2.1產品分析8
2.1.1產品名稱及圖樣8
2.1.2產品結構分析8
2.1.3產品材料的性能和成型條件9
2.2模具設計方案的選擇10
2.2.1基本模架的選擇10
2.2.2凹模結構方案選擇10
2.2.3凸模結構方案選擇11
2.3注射機的選擇11
2.3.1注射機類型的選擇11
2.3.2注射機型號的確定11
2.4模具總體結構設計12
2.4.1分型面的選擇12
2.4.2謀唄炁葥湶駙13
2.4.3謀唄、型芯和抽芯機構的設計將會在以下章節詳細介紹。13
2.5本章小結13
第3章注射模的結構設計13
3.1成型部分的設計14
3.1.1凹模的結構設計14
3.1.2凸模的結構設計 18
3.1.3凹模、凸模材料的選擇及粗糙度要21
3.2澆注系統的設計21
3.2.1澆注系統的組成：21
3.2.2主流道的設計22
3.2.3分流道的設計23
3.2.4澆口的設計24
3.2.5冷料穴的設計25
3.3鈀溢引氣系統設計27
3.3.1鈀溢系統設計27
3.3.2引氣系統的設計27
3.4冷卻系統的設計28
3.4.1模具的冷卻：28
3.4.2冷卻裝置設計注意事項28
3.4.3冷卻裝置的形式28
3.4.4冷卻裝置的理論的計算29
3.4.5冷卻系統的其他零部件31
3.5脫模機構的設計31
3.5.1瘀桿脫模機構的設計32
3.5.2抽芯機構的設計34
3.6復位系統的設計40
3.7瘀荑零部件設計41
3.7.1導向元件的設計41
3.7.2瘀桿的導柱設計42
3.7.3倀位釘43
3.7.4墊塊的設計44
3.7.5動模座板及定模座板的設計44
3.8本章小結45