基于單片機的板式換熱機組設計.doc
約46頁DOC格式手機打開展開
基于單片機的板式換熱機組設計,論文標準word格式排版 共46頁摘要論文研究了水—水換熱機組的設計問題，換熱機組集換熱器、單片機、傳感器、顯示器、變頻器、循環水泵、補水泵于一體，完成對數據的采集、處理、顯示，并進行自動控制。論文主要研究了機組的智能控制系統，該課題的研究目的是實現機組在無人值守的情況下，可按不同的工況條件和用戶的作息時間，合理運行，...
內容介紹
此文檔由會員 莎士比亞 發布
論文標準WORD格式排版 共46頁
摘 要
論文研究了水—水換熱機組的設計問題，換熱機組集換熱器、單片機、傳感器、顯示器、變頻器、循環水泵、補水泵于一體，完成對數據的采集、處理、顯示，并進行自動控制。論文主要研究了機組的智能控制系統，該課題的研究目的是實現機組在無人值守的情況下，可按不同的工況條件和用戶的作息時間，合理運行，達到最佳供暖和節能效果。其中，課題設計硬件電路包括四大模塊：⑴數據采集模塊實現有關溫度信號的采集與放大，并對信號進行?！獢?shù)轉換，形成數字信號；⑵單片機調控模塊對數據采集部分輸出的數字信號進行分析處理，按照已設定的相關程序形成調控信號，傳達到執行機構部分；⑶人-機交互模塊實現相關溫度、壓力信號的實時顯示，便于實時監測；⑷調控執行模塊接受單片機調控部分輸出的調控信號，在單片機的控制下實現對有關流量的調控。；設計軟件系統采用匯編語言編程，主要功能包括基本的溫度、壓力數據顯示，溫度、壓力、流量控制，數據記憶存儲，超壓報警。
關鍵詞：傳感器，單片機，顯示器，變頻器
Abstract
The paper has studied the water and water heat transfer unit's design question, This plate heat exchanger units collect heat interchanger, monolithic integrated circuit, sensor, monitor, frequency changer, circulating water pump in a body. It Completes data gathering, processing, the demonstration, and can through change the water pump’ current capacity in a time side, controls return pipes the water temperature in two time side, enables its temperature to achieve the industry the demand value.It has studied unit's intelligence control system with emphasis. This topic research goal is realizes the unit in the situation which nobody value defends, may according to the different operating mode condition and user's daily schedule, the reasonable movement, achieves the best heating and the energy conservation effect. topic design hardware electric circuit including four big modules: (1) The data acquisition module: Realizes related temperature signal gathering and the enlargement, and carries on the mold --number to the signal to transform, forms the digital signal; (2) monolithic integrated circuit regulation module: The logarithm carries on analysis processing according to the gathering partial outputs digital signal, according to the related procedure which establishes has formed the regulative signal, transmits are partial to the implementing agency; (3) person and machine interactive module: Realizes the correlation temperature signal real time display, is advantageous for the real-time monitor ;(4) regulation carries out the module: Accepts the monolithic integrated circuit regulation partial outputs the regulative signal, realizes under the monolithic integrated circuit control to the related current capacity regulation.
Key words: Sensor, monolithic integrated circuit, monitor, frequency changer
目 錄
摘 要 I
Abstract II
目 錄 III
第一章 引 言 5
1.1 課題研究的背景 5
1.2課題研究的對象 2
1.3課題的技術指標 2
1.4 課題研究的意義 2
第二章 方案的選擇與論證 4
2.1換熱系統方案確定 4
2.2智能控制系統的設計方案 5
2.3 傳感器的選擇與論證 6
2.3.1溫度傳感器的選擇與論證 7
2.3.2 壓力傳感器的選擇 9
第三章 硬件電路的設計 11
3.1 板式換熱機組系統 11
3.1.1板式換熱器的選型設計計算 11
3.1.2水垢處理裝置 12
3.2數據采集模塊 13
3.2.1溫度傳感器電路 13
3.2.2壓力傳感器 15
3.2.3 A/D轉換電路及與單片機接口電路 16
3.3 單片機調控與人際交互模塊 20
3.3.1單片機模塊 20
3.3.2單片機與LED顯示基鍵盤接口電路設計 21
3.4調控執行模塊 24
3.4.1報警電路 24
3.4.2電動調節閥控制電路 25
3.4.3補水泵調節機構 27
第四章 軟件設計 30
4.1 流程圖 30
4.2 主要程序 31
結 論 38
參考文獻 39
致 謝 40
摘 要
論文研究了水—水換熱機組的設計問題，換熱機組集換熱器、單片機、傳感器、顯示器、變頻器、循環水泵、補水泵于一體，完成對數據的采集、處理、顯示，并進行自動控制。論文主要研究了機組的智能控制系統，該課題的研究目的是實現機組在無人值守的情況下，可按不同的工況條件和用戶的作息時間，合理運行，達到最佳供暖和節能效果。其中，課題設計硬件電路包括四大模塊：⑴數據采集模塊實現有關溫度信號的采集與放大，并對信號進行?！獢?shù)轉換，形成數字信號；⑵單片機調控模塊對數據采集部分輸出的數字信號進行分析處理，按照已設定的相關程序形成調控信號，傳達到執行機構部分；⑶人-機交互模塊實現相關溫度、壓力信號的實時顯示，便于實時監測；⑷調控執行模塊接受單片機調控部分輸出的調控信號，在單片機的控制下實現對有關流量的調控。；設計軟件系統采用匯編語言編程，主要功能包括基本的溫度、壓力數據顯示，溫度、壓力、流量控制，數據記憶存儲，超壓報警。
關鍵詞：傳感器，單片機，顯示器，變頻器
Abstract
The paper has studied the water and water heat transfer unit's design question, This plate heat exchanger units collect heat interchanger, monolithic integrated circuit, sensor, monitor, frequency changer, circulating water pump in a body. It Completes data gathering, processing, the demonstration, and can through change the water pump’ current capacity in a time side, controls return pipes the water temperature in two time side, enables its temperature to achieve the industry the demand value.It has studied unit's intelligence control system with emphasis. This topic research goal is realizes the unit in the situation which nobody value defends, may according to the different operating mode condition and user's daily schedule, the reasonable movement, achieves the best heating and the energy conservation effect. topic design hardware electric circuit including four big modules: (1) The data acquisition module: Realizes related temperature signal gathering and the enlargement, and carries on the mold --number to the signal to transform, forms the digital signal; (2) monolithic integrated circuit regulation module: The logarithm carries on analysis processing according to the gathering partial outputs digital signal, according to the related procedure which establishes has formed the regulative signal, transmits are partial to the implementing agency; (3) person and machine interactive module: Realizes the correlation temperature signal real time display, is advantageous for the real-time monitor ;(4) regulation carries out the module: Accepts the monolithic integrated circuit regulation partial outputs the regulative signal, realizes under the monolithic integrated circuit control to the related current capacity regulation.
Key words: Sensor, monolithic integrated circuit, monitor, frequency changer
目 錄
摘 要 I
Abstract II
目 錄 III
第一章 引 言 5
1.1 課題研究的背景 5
1.2課題研究的對象 2
1.3課題的技術指標 2
1.4 課題研究的意義 2
第二章 方案的選擇與論證 4
2.1換熱系統方案確定 4
2.2智能控制系統的設計方案 5
2.3 傳感器的選擇與論證 6
2.3.1溫度傳感器的選擇與論證 7
2.3.2 壓力傳感器的選擇 9
第三章 硬件電路的設計 11
3.1 板式換熱機組系統 11
3.1.1板式換熱器的選型設計計算 11
3.1.2水垢處理裝置 12
3.2數據采集模塊 13
3.2.1溫度傳感器電路 13
3.2.2壓力傳感器 15
3.2.3 A/D轉換電路及與單片機接口電路 16
3.3 單片機調控與人際交互模塊 20
3.3.1單片機模塊 20
3.3.2單片機與LED顯示基鍵盤接口電路設計 21
3.4調控執行模塊 24
3.4.1報警電路 24
3.4.2電動調節閥控制電路 25
3.4.3補水泵調節機構 27
第四章 軟件設計 30
4.1 流程圖 30
4.2 主要程序 31
結 論 38
參考文獻 39
致 謝 40
