畢業設計：EPS減速機構的優化設計
論文說明書共53頁，字?jǐn)?shù)總計：26533
資料簡介：
畢業設計（論文）：EPS減速機構的優化設計.doc
畢業設計（論文）開題報告.rtf
畢業設計（論文）任務書.doc
電動助力轉向系統（譯文）.docx
電動助力轉向系統（原文）.docx
進度考核表.doc
目錄.doc
內容提要（英）.doc
內容提要（中）.doc
新評閱表.doc
優秀畢業論文簡介.doc
優秀畢業論文專家評審表.doc
優秀畢業設計(論文)申報表.doc
A0-EPS減速機構裝配圖.dwg
A2-殼體.dwg
A0-殼體裝配.dwg
A2-軸承殼.dwg
A3-蝸輪組合.dwg
A3-蝸桿.dwg
A3-套筒.dwg
A3-輸出軸.dwg
A4-聯軸器.dwg
A3-安裝支架（中）.dwg
A3-安裝支架（下）.dwg
A3-安裝支架（上）.dwg
A3-安裝墊塊.dwg

內容提要

電動助力轉向系統是典型的機電一體化系統，涉及的學科非常廣泛。包括機械設計、汽車?yán)碚?、電力電子、?jì)算機技術、控制技術、傳感器技術和電機技術等多個領域，因具有節約燃料、減輕自重、提高主動安全性、有利于環保等一系列優點，已成為世界汽車轉向技術發展的研究趨勢。
減速機構作為電動助力轉向系統的關鍵部件之一，因體積的大小直接影響安裝空間和汽車的布局，在設計的過程中不僅要滿足自身的強度要求還應使其體積盡可能的小，結構更緊湊。因此，有必要對所設計的減速機構進行結構上的優化，達到整體設計要求。
在優化設計過程中，以減速機構中蝸桿傳動中心距最小、蝸輪齒冠體積最小以及總體積最小為目標。用Pro/E軟件建立汽車EPS減速機構三維模型。應用ANSYS軟件對汽車EPS結構中渦輪及蝸桿組件進行強度校核。對汽車EPS中動力學模型、助力電動機模型、進行數學建模，選擇EPS助力特性曲線的相關參數，設計EPS的助力特性曲線。
在對電動助力轉向器減速機構優化設計后，達到蝸桿傳動中心距最小、蝸輪齒冠體積最小以及總體積最小為目標，同時使轉向更靈活，安裝空間更小。
Summary

Electric power steering system is the typical electromechanical integration system, involved very extensive subject. Such as mechanical design, automobile theory, power electronics, computer technology, control technology, the sensor technology and motor technology etc, because it has advantages of saving fuel,weight light , improving their security and being good for the environment ,so it has became the vehicle steering technology development trend of research.
Decelerate institutions regard as one of the key components of electric power steering system , the layout of installation space and car is directly affected by the size . in design process,it is not only to meet its own strength requirement ,also should make its volume smaller, structure more compact. Therefore, it is necessary to design the deceleration institutions on the structure optimization, achieve integral design requirements.
In the optimization design process, aiming at reducing the distance of worm transmission center , worm volume and the total volume.Using Pro/E software to built 3D model of EPS. ANSYS software EPS structure turbine and check intensity worm components.buit EPS of car dynamics model, power motor model and mathematical modeling, choose EPS dynamical characteristics curve related parameters and the design of dynamical characteristics curve EPS.
After designing electric power steering gear deceleration institutions of optimized, satisfy the smallest of worm transmission center, tooth corona of worm and the total volume, while making the steering more flexible, installation space smaller.

目錄

內容提要............................. ............ ....... .. Ⅰ
Summary.................................... . ....... ...... Ⅱ
1 緒論........................... ....... .... ..... .... ....1
1.1論文的研究背景與意義...................... ... ........ ....1
1.2 轉向系統的發展歷程........................ .... . . .. ....1
1.3 EPS國內外研究現狀和存在的問題............ ....... ... ....3
2 汽車EPS減速機構優化設計............. . .. ...... .. ....... 8
2.1汽車EPS概述.............. ............ ... ..... . . . . ..8
2.2汽車EPS的組成結構........... ........ ....... ..........10
2.3汽車EPS減速機構優化設計...... ...... ...... ..............18
3 汽車EPS結構有限元分析..... ...... .. ... ..... .............26
3.1結構有限元分析關鍵技術...... ... .... ...... ..............26
3.2汽車EPS結構靜力學分析....... . ...... ... .................27
3.3接觸應力的理論公式解與有限元分析結果的對比.. ....... .....34
4 汽車EPS動態特性分析........ ..... .... ...... .. .... ......36
4.1汽車EPS動力學模型計算....... ......... .... ..... .........36
4.2汽車EPS助力特性曲線設計... ......... .... ................40
4.3 理想的電動轉向轉向手力模型....... .... ..... . ...........43
4.4汽車EPS轉向性能分析........... ...... ... .... .... .......45
總結....... .......... .. ...... ...... ..... .... .............50
參考文獻.......... ............ ..... ..... ...... ..........51
致謝............ ............ ........ ....... . ............52