畢業設計 液壓挖掘機設計
論文說明書共60頁，字數總計：14572
資料簡介：
A0-回轉驅動裝置.dwg
A0-挖掘機總裝配圖.dwg
A1-工作裝置.dwg
A2-動臂液壓缸.dwg
A2-后支腿.dwg
A2-液壓系統.dwg
A3-輸出軸.dwg
A3-行星輪.dwg
畢業設計說明書：液壓挖掘機設計.doc
扉頁.doc
摘要.doc
摘 要

本次結業設計的題目是輪胎式液壓挖掘機與其它類型的挖掘機相比,這種類型的挖掘機有很多優點,它使用汽車底盤.因此,行駛速度較履帶式更快,此外,它還有很好的適應性,可以市區中行走,其引它采用液壓傳動,這改善了挖掘機的整機性能,使其更可靠,再次可以在多個方向上工作,并準確卸載,且可方便卸載.
本次設計的主要參數是給出了斗容量:1m3 .本次主要設計挖掘機的工作裝置,回轉驅動裝置,液壓傳動原理.
在設計中,我采用了汽車盤并加以改一個更大的范圍內工作,因造以滿足要求,上部轉臺是全回轉式,因此它可在采用了液壓傳動控制而使整機性能得以改善.與機械式挖掘機相經,其挖掘機力提高了很多,整機質量約26噸,挖掘力140KN,卸載高度約4.59m,挖掘深度5.089m,挖掘半徑9.075m.


關鍵詞:液壓挖掘機; 液壓控制; 液壓系統; 全回轉; 卸載; 鏟斗.


ABSTRACT

This time topic which graduates a design is tire type the liquid press to scoop out machine and other types of the excavation machine compare, the excavation machine of this kind of type contain a lot of advantages, it uses car bedrock.Therefore drive speed to compare with track type, sooner, in addition, it still has good adaptability, can with run about in the downtown, it leads it to adopt a liquid to press to spread to move, this whole machine function which improves excavation machine, make it more dependable, can work on several directions again, and accurate unload, and convenient unload.
The main parameter of this time design is to give bucket capacity:1m3 .This the main design scoop out machine of work device, the turn-over drives device, the liquid presses to spread to move principle.
In the design, I adopted car dish and take in to change a work inside the larger scope, because of build to satisfy a request, upper part's turning set is a whole turn-over type, so it can Be adopting a liquid to press to spread to move control but canning make the whole machine function improve.Scoop out machine with machine type mutually through, the its excavation machine dint raised a lot of, the whole machine quality is about 26 ton, the excavation dint 140 KN, unload height about 4.59 m, the excavation depth 5.089 m, scoop out a radius 9.075 m.


Keyword: the liquid press to scoop out machine; the liquid presses a control; the liquid presses system; whole turn-overs; unload; bucket.




目 錄

1 概述……………………………………………………………………………1
1.1 機械發展的特點……………………………………………………… 1
1.2 挖掘機械的類型……………………………………………………… 2
1.3 單斗液壓挖掘機的基本組成和工作原理…………………………… 2
1.4 本次設計任務………………………………………………………… 2
2 設計方案………………………………………………………………………3
2.1 工作裝置方案設計…………………………………………………… 3
2.1.1 工作裝置設計原則………………………………………………… 3
2.1.2 反鏟裝置的組成及構造特點……………………………………… 3
2.1.3 具體結構方案……………………………………………………… 4
2.2 回轉機構方案設計…………………………………………………… 5
2.2.1 對回轉機構的基本要求…………………………………………… 5
2.2.2 回轉機構的選擇…………………………………………………… 5
2.2.3 制動器的選擇……………………………………………………… 6
2.3 液壓系統方案設計…………………………………………………… 6
2.3.1 單斗液壓挖掘機的作業過程包括下列幾個間歇動作…………… 6
2.3.2 對液壓系統的要求………………………………………………… 6
3 工作裝置設計計算………………………………………………………… 7
3.1 尺寸估計……………………………………………………………… 7
3.2 運動分析……………………………………………………………… 8
3.2.1機構自身幾何參數………………………………………………… 8
3.2.2 動臂的運動 ……………………………………………………… 8
3.2.3 斗桿的運動…………………………………………………………12
3.2.4 鏟斗的運動…………………………………………………………13
3.3 工作裝置的設計計算…………………………………………………14
3.3.1 斗形參數選擇………………………………………………………14
3.3.2 轉斗挖掘阻力計算…………………………………………………14
3.3.3 動臂機構參數的選擇………………………………………………15
3.3.4 鏟斗機構的參數選擇………………………………………………20
3.3.5 鏟斗機構載荷分析…………………………………………………21
3.3.6 斗桿機構的參數選擇………………………………………………22
3.3.7 動臂液壓缸，斗桿液壓缸，鏟斗液壓缸初步設計估算…………24
4 回轉裝置設計計算………………………………………………………… 25
4.1 滾動軸承式回轉支承的選型計算……………………………………25
4.2 回轉起動力矩和制動力矩計算………………………………………31
4.3 行星減速器設計………………………………………..