畢業設計：光盤盒注塑模具設計及型腔仿真加工
論文說明書共28頁，字?jǐn)?shù)總計：13707
資料簡介：
仿真加工
Pro-E三維圖
文獻資料
英文翻譯
A0-裝配圖.dwg
A3-大推桿.dwg
A3-帶頭倒套.dwg
A3-導桿固定板.dwg
A3-倒柱.dwg
A3-定模板.dwg
A3-定模固定板.dwg
A3-定模座板.dwg
A3-定位環.dwg
A3-動模底板.dwg
A3-動模座板.dwg
A3-光盤盒零件圖.dwg
A3-滑座.dwg
A3-回程桿.dwg
A3-冷卻水管接頭.dwg
A3-推板.dwg
A3-推板導柱.dwg
A3-推桿固定板.dwg
A3-限距拉釘.dwg
A3-限距螺釘.dwg
A3-小推桿.dwg
A3-斜滑桿1.dwg
A3-斜滑桿2.dwg
A3-型腔板.dwg
A3-型芯.dwg
A3-直倒套.dwg
A3-主流道襯套.dwg
A4-光盤盒.dwg
A4-限距螺釘.dwg
A4-主流道襯套.dwg
畢業設計任務書.doc
畢業設計說明書封面.doc
設計說明書：光盤盒注塑模具設計及型腔仿真加工.doc
摘要.doc
型腔加工工序卡片.doc
型腔加工工藝卡片封面.doc
注塑工藝流程圖封面.doc
注塑工藝流程圖.doc
注塑模具裝配工藝過程卡.doc
注塑模具裝配工藝過程卡封面.doc
課題申報表.doc
三維圖冊.doc
畢業設計三維圖集封面.doc
開題報告.doc
畢業實習報告.doc
光盤盒模具設計及其型腔仿真加工
摘 要：
模具制造技術迅速發展，已成為現代制造技術的重要組成部分。如模具的CAD/CAM技術，模具的激光快速成型技術，模具的精聾@尚渭際?，模具的超精盟G庸ぜ際?。本课甜x杓剖嵌怨馀毯心＞呱杓坪托頹環掄婕庸?。设计过秤懨{捎肞ro/E Wildfire 4.0進行三維造型、分型面設計和模流分析，用CAD進行零件圖和裝配圖的繪制，用Pro/E進行模具型腔的仿真加工。
光盤盒的形狀較為復雜，所以模具設計中要考慮的因素有很多，除考慮它的出模、分型面，還需考慮它成型的質量，表面光潔度等。更重要的是考慮它的制造難度和成本。所以我們設計應認真分析塑料制品的結構，尋求最佳的設計方案。分型面的選擇也很重要，制件不是平直表面，制件的形狀很不規則，分型面的選擇既要考慮不影響制件表面的美觀，又要達到結構要求。由于制品體積比較大，所以澆注系統的設計也很重要。在此次設計中塑件的兩個盒面用兩個完全彈性鉸鏈連接，有側凸和側凹結構。模具采用一模一腔，兩個點澆口注射，頂桿頂出，用斜滑桿機構實現內外側抽芯，回程桿復位。
關鍵詞：模具設計 仿真加工 注塑模具


The Design and Simulation Processing
of DVD box injection mold
Abstract: The mold manufacture technology rapid development, has become the modern manufacture technology the important constituent. If the mold CAD/CAM technology, the mold laser fast takes shape the technology, the mold precise formed technology, the mold ultra precise processing technology.This subject design is to design DVD box injection mold and make the simulation processing of the mold cavity. In the design process, Pro/E Wildfire 4.0 were used to construct on the three dimensional modeling, make parting surface and make analys on mold flows, CAD were used to make parts drawing and assembly drawing,Pro/E Wildfire 4.0 were used to carry on the mold cavity simulation processing.
The machine of CD the shape of the cover than for complicacy, so want in the molding tool design the factor of the consideration have a lot of, a mold, cent type that divided by the consideration it, still need the consideration quantity that it model, surface clean an etc..More important consideration it of manufacturing difficulty with cost.So our design should analyze the construction that plastics product hard, design project looking for best.The choice of the cent type is too very important, a shape for is not straight and even surface, the piece of system is very irregular, the choice of the cent type since consider to do not affect a superficial beauty, attain the construction request again.Because producting the physical volume bigger, so sprinkle the design that note the system too very important, here a design inside In this design The two parts of the disk-box are connected by tow hinge and the box have undercuts.There are only one cavity in this mold and two gates in this runner system. The lifter system is used to form the external undercut and internal undercut.
Key words: mold design processing simulation enjection mould
目 錄
1 前言 1
2 模具總體設計 3
2.1 制品的分析 3
2.2模具總體方案設計 4
2.3注射機的選擇 5
2.4型腔數的確定 6
2.5分型面的確定 6
2.6澆注系統設計 6
2.6.1澆口的形式 6
2.6.2流道、主流道襯套及定位環的設計 7
2.6.3冷料井的設計 8
2.7冷卻系統的設計 9
2.8模架的選擇 11
2.9導柱、導套的選擇 12
2.9.1導柱的選擇 12
2.9.2導套的選擇 12
2.10頂桿設計 13
2.11復位桿 14
2.12鎖模力的校核 15
2.13開模行程的校核 15
2.14總裝配圖及三維造型圖 16
2.14.1總裝配圖 16
2.14.2模具的三維造型圖 17
3工藝分析及仿真加工 18
3.1模具的注塑工藝分析 18
3.2模具成型件制造工藝與加工工序 20
3.2.1模具成型件制造工藝 20
3.2.2模具成型件的加工工藝 20
3.3數控仿真 20
4結論 24
參考文獻 25
致謝 26
附錄 27