畢業設計 基于PLC控制的三自由度氣動機械手設計
論文說明書共58頁，字?jǐn)?shù)總計：22643
資料簡介：
畢業設計任務書.doc
畢業設計開題報告.doc
文獻翻譯.doc
畢業設計論文.doc
A1-PLC接線圖及梯形圖.dwg
A4-導向套.dwg
A3-活塞.dwg
A3-伸縮氣缸活塞桿.dwg
A4-機構簡圖.dwg
A3-機座.dwg
A3-氣動回路圖.dwg
A4-氣缸筒.dwg
A3-伸縮缸后端蓋.dwg
A3-伸縮缸前端蓋.dwg
A2-伸縮缸裝配圖.dwg
A1-手爪裝配圖.dwg
A3-轉動殼體.dwg
A0-裝配圖.dwg
摘 要
在機械制造業中，機械手已被廣泛應用，大大地改善了工人的勞動條件，顯著地提高勞動生產率，加快了實現工業生產機械化和自動化的步伐。
本文通過對機械手的組成和分類，及國內外的發展?fàn)顩r的了解，對本課題任務進行了總體方案設計。確定了機械手用三自由度和圓柱坐標型式。設計了機械手的夾持式手部結構；以及設計了機械手的總體結構，以實現機械手伸縮，升降，回轉三個自由度及手爪的開合。驅動方式由氣缸來實現手臂伸縮和升降，異步電機來實現機械手的旋轉。
運用了FX 系列可編程序控制器（PLC）對上下料機械手進行控制, 論述了電氣控制系統的硬件設計, 控制軟件結構以及手動控制程序和自動控制程序的設計。
關鍵詞：機械手，氣缸，可編程序控制器
Abstract
In mechanical manufacturing industry, manipulator has been applied extensively so that the labor condition of worker has been greatly improved , labor productivity raised notably, the step of industrial production mechanization and automation realized rapidly.
This article through to manipulator's composition and the classification, and the domestic and foreign development condition's understanding, has carried on the overall concept design to this topic duty. Had determined the manipulator uses three degrees-of-freedom and the circular cylindrical coordinate pattern. Has designed manipulator's clamp type hand structure; As well as has designed manipulator's gross structure, realizes the manipulator to expand and contract, the fluctuation, rotates three degrees-of-freedom and hand fingernail's opening and closing. The drive type realizes the arm expansion and the fluctuation by the air cylinder, the asynchronous machine realizes manipulator's revolving.
The paper illustrates that the control of the upper and lower material by means of the PLC and also includes the hardware design of the electric control system, the control software structure and the design of the manual and automatic control program.
Key words: manipulator, air cylinder, Programmable controller（PLC）
目 錄
1 緒言 1
1.1 機械手的概述 1
1.2 我國機械手的發展 1
1.3 氣動機械手的應用現狀及發展前景 3
1.4 本課題設計要求 5
2 機械手的總體設計方案 7
2.1 機械手的系統工作原理及組成 7
2.2 機械手基本形式的選擇 8
2.3 驅動機構的選擇 9
2.4 機械手的技術參數列表 9
3 機械手的機械系統設計 11
3.1 機械手的運動概述 11
3.2 機器人的運動過程分析 12
4 機械手手部結構設計及計算 13
4.1 手部結構 13
4.2 手部結構設計及計算 14
4.3 夾緊氣缸的設計 16
5 機械手手臂機構的設計 22
5.1 手臂的設計要求 22
5.2 伸縮氣壓缸的設計 22
5.3 導向裝置 27
6 機械手腰部和基座結構設計及計算 29
6.1 結構設計 29
6.2 控制手臂上下移動的腰部氣缸的設計 29
6.3 導向裝置 33
6.4 平衡裝置 33
6.5 基座結構設計 34
7 氣動系統設計 37
7.1 氣壓傳動系統工作原理圖 37
8 機械手的PLC控制系統設計 39
8.1 可編程序控制器的選擇及工作過程 39
8.2 可編程序控制器的使用步驟 40
8.3 機械手可編程序控制器控制方案 40
9 結論 52
參考文獻 53
致謝 54