[摘要]：

湖北省武漢至麻城高速公路起于三里鎮長提，止于夏家崗，于規劃的武麻高速公路黃岡段對接。本設計選取第一合同段K1+600～K4+700段，全長3.1公里。根據施工圖設計路線方案，全線采用雙向四車道高速公路標準，設計速度100km/h，路基寬度26.0m，橋涵設計荷載為公路—1級，橋路同寬。主要設計內容包括：平面設計、縱斷面設計、橫斷面設計、防護工程設計（重力式擋土墻）、路面設計（瀝青混凝土柔性路面）及橋梁設計。  其中，平面設計、縱斷面設計、橫斷面設計、防護工程設計采用手工計算、繪圖；路面結構設計、路面厚度計算和面層拉應力驗算采用公路路面結構設計系統HSP2000進行設計；橋梁工程采用橋梁結構分析軟件BSAS進行設計。

[關鍵字]：高速公路   路線   路基    路面   擋土墻   橋梁

[Abstract]：

The starting point of the express highway design from Wuhan city to Ma city ,Hubei province ，is Changti village, Sanli town ,and the superhighway ends in Xiajiagang village, which connects to Huanggang section of the highway. The section of the highway from  K1+600 to K4+700 is selected to design, which is 3.1 kilometers long. According to the route project of construction documents design phase, the whole line adopts superhighway standard of two－way traffic and four lanes. The designed velocity of the highway is 100 km/h, and the roadbed width is 26.0 m, The designed load of the bridge adopts highway-Ⅰ-grade,and the width of the bridge is the same as the highway. The main contents of the project include the plain design, the vertical section design, the cross section design, the protection engineering design(the retaining wall of gravity ), the road surface design(Asphalt Concrete Pavement) and bridge design。  Among them, the calculation and painting of flat design, vertical section design, cross section design, the protection engineering design are designed by handicraft .The design of road surface structure ，the calculation of the thickness of the road surface and checking computations of the tensile stress adopt the design system of the highway road surface structure--- HSP2000.And the bridge engineering adopts bridge structure analysis software BSAS to design.

[Keywords]:  expressway  route  roadbed  road surface  retaining wall  bridge

目   錄

1緒論  …………………………………………………………………………3

1.1工程概況  …………………………………………………………………3

1.2地質概況  …………………………………………………………………3

1.3 技術資料   ………………………………………………………………7

2路線設計   …………………………………………………………………8

2.1路線設計方案及比選   …………………………………………………8

2.2平面設計  ………………………………………………………………14

2.3縱斷面設計  ……………………………………………………………22

2.4橫斷面設計  ……………………………………………………………31

3擋土墻設計  ………………………………………………………………37

3.1擋土墻的布置  …………………………………………………………37

3.2重力式擋土墻設計  ……………………………………………………39

4路面設計  …………………………………………………………………46

4.1路面設計資料  …………………………………………………………46

4.2路面結構設計  …………………………………………………………46

5公路橋涵結構計算  ………………………………………………………54

5.1方案簡介  ………………………………………………………………55

5.2本橋主要材料……………………………………………………………56

5.3橋梁設計荷載……………………………………………………………56

5.4橋梁結構計算……………………………………………………………56

6結束語    …………………………………………………………………63

7參考文獻    ………………………………………………………………64