基于PLC控制的自動化立體車庫設計的畢業論文

共49頁 字?jǐn)?shù):24000

關鍵詞：立體車庫，控制系統，可編程序控制器，鋼結構

摘要:立體車庫是專門實現各種車輛的自動停放及科學寄存的倉儲設施。隨著城市汽車保有量的不斷增加，停車難問題己經成為大中型城市的一個普遍現象。機械式立體車庫可充分利用上地資源，發揮空間優勢，最大限度地停放車輛，成為解決城市靜態交通問題的重要途徑。本課題以較為典型的升降橫移式立體車庫為研究對象，綜合考慮立體車庫制造成本和運行效率的雙重因素。
本文在對國內外車庫現狀及發展趨勢做了充分調研的基礎上，選擇三層三列式車庫結構為研究模型。升降橫移式立體車庫就其組成部分而言，可分為三大部分：車庫結構部分、傳動機構部分和控制系統部分。本文簡單介紹了車庫的主體結構和特點，對車庫的控制系統也作了簡單的說明，依據升降橫移式立體車庫的運行原理，運用力學理論對升降橫移式立體車庫的結構進行了全面的力學分析，包括升降橫移式立體車庫的框架結構的強度、橫移傳動系統中軸的強度和升降傳動系統中軸的強度等。在對升降橫移式立體車庫控制系統的設計中，采用了先進的PLC控制，運用歐姆龍公司的編程軟件編制了升降橫移式立體車庫控制系統的程序，并經調試、運行，證明采用可編程序控制器(PLC)作為控制系統簡單易行。其穩定、可靠、快速、性?xún)r(jià)比高的特點使得控制系統非常完美。為了使停車設備滿足使用要求，根據國家關于機械式停車設備通用安全要求的標準、升降橫移式立體車庫的實際，在升降橫移式立體車庫中使用了一些必要的安全技術，這樣保證了車輛的絕對安全，使得整個車庫可以安全平穩的運行。
Stereo garage is the storage which is used for automatic parking and scientific storage of kinds of automobile. As the quantity of urban automobile has increased continuously in nowadays, the hard-to-Park Problem has become a common phenomenon. Mechanical stereo garage can use land resource sufficiently and bring space advantage into play, and maximize the number of parking cars. It has become an important way for static traffic problem of cities. The issue studies the type mechanical parking system which named up-down and translation stereo garage, and regards of the two factors of cost of manufacture and operational efficiency synthetically.
On the basis of investigation on current situation and developing trend of garage in domestic and abroad, we choose three-layer and three-formulistic garage structure as the research model. According to the form of the dragging-forms of multi player up-down and translation ear-base, it is made of three parts: part of ear-base structure、part of driving-framework and part of control system. The paper simply introduces main structure and characteristics of garage and also gives a short introduction to its control system. The finite element reliability checking of steel structure of garage is utilized according to the operation principle of up-down and translation stereo garage, the mechanics was used to comprehensively analyze the up-down and translation stereo garage. Including intension of the framework structure and axes, etc. The paper adopted PLC as control system in designing the up-down and translation stereo garage, PLC software of OMRON company was used to weave the program of control system, through debugging running. The result proved that adopted PLC as control system is simple and easy to realize. The characteristic of stabilization, credibility, speediness and high capability made the control system very perfection. In order to satisfy using demand in design stereo garage, according to criterion of mechanical parking systems-general safety requirement and the facts of the up-down and translation stereo garage the Paper introduced some safety technique which was used in the up-down and translation stereo garage. This can ensure absolute safety for Car and make the whole stereo garage safety and running smooth.
目錄

第一章 緒論 3
1.1 課題的背景和意義 3
1.2 課題的關鍵技術及其國內外研究發展現狀 6
1.2.1 國外研究現狀 6
1.2.2 國內研究現狀 7
1.3 本文的主要工作目標和工作內容 8
第二章 升降橫移式立體車庫機械部分設計 10
2.1 升降橫移式立體車庫的基本結構 10
2.1.1 升降橫移式立體車庫簡介 10
2.1.2 立體車庫鋼結構設計 13
2.2 立體車庫升降橫移機構設計 21
2.2.1 橫移機構設計 21
2.2.2 載車板設計 24
2.2.3 安全防護機構 24
2.2.4 提升機構及軸的設計 25
第三章 立體車庫電氣控制系統設計 31
3.1 電氣控制系統整體設計 31
3.2 電氣系統關鍵部分設計 35
3.3 PLC控制程序設計 36
3.4 電氣安全裝置 42
第四章 結論與展望 45
4.1 結論 45
4.2 展望 45
感謝 47
參考文獻 48
參考文獻
[1] 張啟君.立體車庫的主要型式及技術特點 [M].機電產品開發與創新，1999；
[2] 付翠玉，關景泰.立體車庫發展的現狀與挑戰 [M].機械設計與制造，2005；
[3] 中國重型機械工業協會，停車設備管理委員會編. 機械式立體車庫 [M].海洋出版社， 2001；
[4] 中國重型機械工業協會，停車設備管理委員會編. 機械式立體車庫 [M].海洋出版社， 2001；
[5] 任伯森等，機械式立體車庫.海洋出版社，2001；
[6] 國家機械工業局，機械行業標準《簡易升降類機械式停車設備》1999；
[7] 中華人民共和國機械工業部，機械行業標準《機械式停車設備類別、型式與基本參數》.1998；
[8] 國家機械工業局，機械行業標準《升降橫移類機械式停車設備》.1999；
[9] 李正吾等編著. 機電一體化技術及其應用 [M].機械工業出版社，1990；
[10] 盧金鼎，山靜民主編. 機電一體化技術 [M].中國輕工業出版社，1996；
[11] 張啟君.立體車庫的主要型式及技術特點.機電產品開發與創新，1999；
[12] 徐顴.機械設計手冊(第3，4卷).北京:機械工業出版社，1991；
[13] 任伯森.機械式立體停車庫.海洋出版社，2001；
[14] 皮壯行，宮振鳴，李雪華等.可編程序控制器的系統設計與應用實例.北京:機械工業出版社，2000；