螺絲刀工具箱的虛擬裝配及其蓋板模具設計

摘要

螺絲刀工具箱，是一個結構不是很復雜但是卻十分的精巧的產品，由于本設計有兩大部分：一部分是螺絲刀工具箱的整體結構的設計，另一部分是蓋板的模具設計，本文進行了其螺絲刀工具箱的整體結構設計以及蓋板注塑模具一模兩件的設計，并詳細闡述了設計過程。

基于UG進行了結構設計，然后虛擬裝配后導出IGS格式到keyshot4.0進行了渲染，讓其顏色更加的接近實際情況。

基于模流分析技術優化了模具的成型工藝參數、澆注系統及冷卻系統。在考慮制件外觀的同時，確定了制件澆口位置在蓋板的側面；優化后的成型工藝參數為：模具溫度100℃、熔體溫度300℃、注射時間1.9s；蓋板采用側澆口、一模兩腔成型，建立澆注系統后預測了其成型注射壓力和鎖模力，為注塑機規格選擇提供了依據；冷卻水溫及IPC時間分別為80℃和30s。根據模流分析結果進行了成型設備的選擇。

基于UG注塑模向?qū)K進行了該產品的模具設計。然后基于proe5.0進行模架的設計，澆注系統及冷卻系統由模流分析確定。模具設計的難點在于幾個關鍵部位的抽芯，在此采用了斜導柱抽芯機構、和側滑塊抽芯機構等。完成成型零件的設計后調用標準模架，實現了整副模具的3D設計。最后繪制了2D裝配圖及零件圖。

關鍵詞：虛擬裝配；注塑模；CAE分析；斜導柱；側滑塊；

Summary 

  Screwdriver kit, is a very complex structure but not very sophisticated products, due to the design of two parts: one part is the overall structure of the screwdriver toolbox design, the other part is the cover of the mold design, this paper carried out its the overall structure and design of the screwdriver toolbox injection mold cover a two-piece mold design and detail design process.

  First,based on the structural design UG were then exported to the virtual assembly IGS format keyshot4.0 were rendered, let the color is more close to the actual situation. 

  Secondly help mold flow analysis techniques to optimize the process parameters of mold forming, casting systems and cooling systems. In considering the appearance of the same parts, parts to determine the location of the gate at the side of the cover; molding process parameters optimized for: mold temperature of 100 ℃, the melt temperature of 300 ℃, the injection time of 1.9s; cover with lateral water mouth, forming a two-cavity mold, after the establishment of the gating system to predict its pressure and clamping force injection molding, injection molding machine specifications selected to provide a basis; cooling water temperature and IPC time was 80 °C and 30s. Molding equipment were selected based on mold flow analysis.

   The product has been designed based mold injection mold UG Wizard module. Then design, gating system and cooling system based on proe5, 0 conduct mold flow analysis to determine the mode. Difficulty lies in mold design several key parts of the core pulling, this uses a bevel pillar core-pulling mechanism, and side slider pulling mechanism and so on. After the completion of the molded part is called standard mold design, 3D design to achieve a whole deputy mold. Finally, draw a 2D assembly drawings and part drawings. 

Keywords: virtual assembly; injection mold; CAE analysis; Bevel column; side slider;

目錄

第一章 前言 1

1.1我國模具行業發展的現狀和前景 1

1.2選題的目的及意義 2

1.3本課題主要研究?jī)?nèi)容 2

第二章 螺絲刀工具箱的設計及虛擬裝配 3

2.1概述 3

2.2零件的結構設計 3

2.3虛擬裝配 6

第三章 模流分析 7

3.1塑件結構分析 7

3.2塑件材料 7

3.3 Moldflow Plastic Insight(MPI)簡介 8

3.4 CAD模型的準備 8

3.5 CAE網格模型的準備 9

3.6材料選擇與澆口位置分析 10

3.7快速充填分析 11

3.8成型窗口分析 13

3.9流道系統 15

3.9.1模架的初選 15

3.9.2流道系統的尺寸的確定 15

3.10冷卻分析及優化 18

3.10.1冷卻系統的設計 18

3.10.2冷卻分析及優化結果 20

3.11保壓分析及優化 23

3.12翹曲分析 24

3.12.1翹曲產生的原因 24

3.12.2翹曲分析結果 24

3.13模流分析結果總結 25

四章 塑件成型工藝與設備 26

4.1注塑成型工藝條件 26

4.1.1 溫度 26

4.1.2 壓力 26

4.1.3 時間 26

4.2注射機型號的確定 26

4.2.1注塑量校核 27

4.2.2塑件鎖模力校核 27

4.2.3注射壓力的校核 27

4.2.4模具安裝尺寸校核 27

4.2.5拉桿內距，容模厚度，模板最大開距的校核 28

第五章 注塑模結構設計 29

5.1型腔布局 29

5.2制品成型位置及分型面的選擇 29

5.3排氣系統設計 30

5.4斜導柱、側滑塊機構設計 30

5.4.1 斜導柱的設計 30

5.4.2 滑塊的設計 31

5.4.3 壓塊的設計 34

5.4.4 鎖緊塊的設計 34

5.4.5 斜頂?shù)脑O(shè)計 34

5.5模架及標準件的選擇 35

5.5.1 模架的選擇 35

5.5.2模架板吊環螺絲孔的規定 36

5.5.3 定位圈 36

5.5.4 限位釘 37

5.6澆注系統設計 37

5.6.1 主流道設計 37

5.6.2 分流道設計 38

5.6.3 冷料穴的設計 38

5.6.4 澆口的位置、數量的確定 39

5.7冷卻系統設計 40

5.8脫模系統設計 41

5.8.1 扁頂針推出 41

5.8.2 斜頂推出 41

5.8.3 推桿固定板的先復位機構 41

5.9導向定位系統設計 42

5.9.1 導向系統的設計 43

5.10模具結構及運動過程 45

5.10.1 模具結構 45

5.10.2 模具運動過程 45

總結 47

致謝 48

參考文獻 49

附錄（翻譯） 50

英文原文： 50

中文譯文： 58