摘 要

液壓系統主要是用于工作臺的直線運動和回轉運動，各個動力頭和刀具的快速進退及切削進給，工件夾緊等。進給系統是鉆機的重要組成部分，直接影響鉆進效率、質量和鉆機的功率消耗。進給回路一般有節流進給，壓力平衡進給和調壓進給3種方式。
論文通過對液壓進給機構得了解，運用所學知識，設計計算了整個液壓進給機構的原理。從最初的液壓缸基本尺寸的計算和選擇，到液壓原理圖的得出，以及整個系統裝配圖的繪制，從產品生產工藝，液壓系統裝配和液壓各種回路等方面都對大學四年所學習的知識進行了總結，為我們走向液壓方向崗位也奠定了良好的基礎。在設計過程中，在windows操作系統條件下，用AutuCAD軟件繪制了裝配圖。
論文主要研究包括以下一些方面：
1、設計液壓六工位進給系統,用于曲軸自動平衡機去重系統，通過本課題的研究使學生了解鉆液壓驅動的工作原理、結構特點。
2、了解機構設計方法,學習和鞏固所學的專業文化知識,培養學生結構設計能力。
3、繪制設備總圖、主要零件圖，編寫設計說明書。


關鍵詞：機床，液壓，油缸，進給機構。





ABSTRACT

Hydraulic system is mainly used in workstations and the linear motion rotary movement, each power tool and the rapid advance and retreat and cutting feed, and the workpiece clamping. Feed system is an important component of the drilling rig, drilling a direct impact on the efficiency, quality and rig the power consumption. Feed into the circuit generally have to cut expenditure, the pressure balance and feed to surge into three ways.
Papers by hydraulic feeding mechanism in the understanding and use of the knowledge, design and calculation of the entire hydraulic feed the principle. From the initial hydraulic cylinder the size of the basic calculation and choice, to the hydraulic principle of the draw, and the system as a whole assembly of the draw, it has laid a good foundation for us to move towards the direction of hydraulic posts. In the design process, under the conditions of the windows operating system, we map software using AutuCAD the assembly.
The following major research papers, including some aspects:
1、Design the six-feeding hydraulic system for the crankshaft to automatically re-balance system, Through the study of this topic so that students understand drilling hydraulic-driven principle, structural features.
2、Design methods to understand, study and consolidate the culture of professional knowledge, training students structural design capacity.
3、Drawing the map equipment, mainly parts map, prepared by the Design Manual.


Key words: Machine tools, hydraulic, fuel tanks, feeding mechanism



目 錄
中文摘要 Ⅰ
ABSTRACT Ⅱ
1、 緒論 1
1.1 引言 1
1.2 我國液壓技術現狀 1
1.3 液壓缸設計的基本步驟 3
1.4 本論文主要研究工作 4
2、 液壓傳動系統的設計計算 5
2.1 液壓缸在進給系統中的工作原理 5
2.2 液壓缸結構圖 6
2.3 液壓系統的計算 6
2.3.1 計算外負載 6
2.3.2 確定液壓系統參數 8
2.3.3 擬定液壓系統原理圖 12
2.3.4 系統PLC控制 16
2.3.5 選擇液壓元輔件 19
2.4 進給機構的設計 22
3、 液壓系統的驗算 23
3.1 系統壓力損失計算 23
3.2 系統效率計算 26
3.3 系統的發熱估算 27
4、 結論 28
附錄 29
參考文獻 30
致謝