摘要
塑料工業是當今世界上增長最快的工業門類之一，而注塑模具是其中發展較快的種類，因此，研究注塑模具對了解塑料產品的生產過程和提高產品質量有很大意義。
本設計介紹了注塑成型的基本原理，特別是雙色注塑成型的結構與工作原理，對注塑產品提出了基本的設計原則；詳細介紹了熱流道注射模具澆注系統、溫度調節系統和頂出系統的設計過程，并對模具強度要求做了說明；最后介紹了當今世界上最為普及的三維CAD/CAM系統標準軟件PRO/ENGNEER的PROGRAM模塊，對螺桿和彈簧進行了參數化設計。
通過本設計，可以對注塑模具有一個初步的認識，注意到設計中的某些細節問題，了解模具結構及工作原理；通過對PROGRAM的學習，可以建立較簡單零件的零件庫，從而有效的提高工作效率。
關鍵詞：塑料模具；分型面；澆注系統；雙色
 
The Injection Model Design of Two-color Travel Cup
ABSTRACT
Plastics industry is one of the fastest growing industry categories in the world, and the injection mold is one of the types of rapid development. Therefore, it has great significance to understand the production process of injection mold plastic products and improve its quality when we research injection mold plastic products.
   The design introduces the basic principles of injection molding, in particular the two-color injection mold the structure and working principle. And it proposes the basic design principles of injection molding products. It gives details of the injection mold, pouring hot flow, temperature regulation system and to the top of design process. Besides, the mold have strength requirements done. Finally, it introduces the PROGRAM module of most popular 3D CAD / CAM system software standard PRO / ENGNEER in the world. And the Screw  and Spring sets parameters for the design.
    Through this design, we can have a preliminary understanding of the injection mold. At the same time, we note that the design of certain details of the understanding die structure and working principle. Through the study of PROGRAM, we can create a relatively simple components parts store, and effectively improve efficiency.

Key word: The plastic mold；the profile；Pouring System；two-color

目錄
1.緒論 1
1.1 各種模具的分類和占有量 1
1.2我國塑料模的現狀 2
1.3塑料模發展趨勢 3
1.4本章小結 5
2.塑件的結構工藝性 6
2.1 功能設計 6
2.2材料選擇(聚丙烯:PP) 6
2.3塑料配方說明 7
2.4 塑件的結構 8
2.4.1 壁厚 8
2.4.2 脫模斜度 8
2.4.3圓角 8
2.5 塑件的尺寸精度及表面質量 9
2.5.1尺寸精度 9
2.5.2塑件的表面質量 10
2.6本章小結 10
3.塑件成型原理及工藝特性 11
3.1 注塑成型工藝簡介 11
3.2 注塑成型工藝條件 12
3.3注射機的選擇 14
3.3.1注塑機基本參數 14
3.3.2選擇注塑機 15
3.4注射機的校核 17
3.4.1 最大注塑量的校核 17
3.4.2 鎖模力的校核 18
3.4.3 塑化能力的校核 18
3.4.4 噴嘴尺寸校核 18
3.4.5 模具外形尺寸校核 18
3.4.6 模具安裝尺寸校核 18
3.4.7 開模行程校核 19
3.5本章小結 19
4.分型面的選擇與澆注系統 20
4.1 分型面 20
4.1.1分型面的選擇原則 20
4.1.2型腔數目的確定 20
4.2澆注系統的設計 21
4.2.1主流道設計 21
4.2.2澆口設計 22
4.3排氣系統的設計 23
4.3.1排氣設計 23
4.3.2排氣設計原則 23
4.4本章小結 23
5.成型與結構的零部件設計 25
5.1成型零件結構設計 25
5.2成型件剛度與強度的計算 27
5.2.1計算時需要考慮的問題 27
5.2.2型腔壁厚和底板厚度計算 28
5.3模具結構設計 30
5.3.1模具材料的選擇 30
5.3.2模架的選定 31
5.3.3模架零部件設計 32
5.4本章小結 41
6.溫度調節系統設計 42
6.1溫度調節對塑件質量的影響 42
6.2對溫度調節系統的要求 42
6.3溫度調節系統設計 42
6.4冷卻系統設計 43
6.4.1設計原則 43
6.4.2冷卻管道設計 43
6.4.3冷卻系統的結構 47
6.5本章小結 48
總結 49
參考文獻 50
致謝 51
附錄  圖紙清單 52