1. 環境控制I. Environmental Control:
1) 所有工作區的相對濕度和溫度應該保持在一定的范圍并進行監測。一旦相對濕度百分比降至限度以下，立即通知QC和工程部進行處理。Relative Humidity and temperature in all works areas shall be monitored and maintained. If % relative humidity falls beyond the limits, immediately inform QC and engineering for disposition.
2) 在將裝配的產品置于無靜電工作站前，在整個生產期間，使用離子發生器的生產線都應處于工作狀態。離子發生器被安裝在容易發生靜電的區域。檢測其衰減時間，小于或等于5秒鐘，或者根據客戶要求；檢測平衡電壓，小于或等于5伏，或者根據客戶要求。Lines that uses Ionizers shall be in operations prior to handling of assembled products to static free work stations and shall be operating during the entire period of production. Ionizers are installed on areas where the chances of static build up occur. Check for the decay time , =/ < 5 seconds or as required by the customer, and the balance voltage =/< 5 volts or as required by the customer.

2. 個人接地線系統Personnel Grounding System
1) 在生產線的不同站點,隨機抽檢十個員工。Randomly sampling at least 10 personnels from the different station of the production line.
2) 員工手腕上帶著靜電手環，將靜電手環與地線系統相連接讓員工握著電荷分析儀的金屬桿，如圖1所示：With their groundstrap on their wrist, connect their groundstrap to the grounding system and let the personnel hold the metal rod of the Charge Analyzer . See figure 1.