3.49萬字               148頁

摘要:本畢業設計題目是江大醫學院框架結構圖書館設計, 為多層鋼筋混凝土框架結構。該圖書館共六層層,主體六層。層高均為3.60米，建筑物總高度為21.6米。

內容包括建筑結構設計。其中建筑結構設計部分計算書的主要內容為構件尺寸的初步確定、框架的計算簡圖、荷載橫向側移計算、框架在水平及豎向荷載作用的內力分析和計算、內力組合、截面設計及基礎設計。其中計算水平地震力作用時采用底部剪刀法，計算豎向荷載作用時采用彎矩二次分配法。

電算時，先用PKPM軟件進行結構平面布置，檢查平面數據，輸入次梁樓板，輸入荷載數據，形成PK文件，畫結構平面圖；然后使用PK進行框架計算；最后用TAT軟件進行框架的空間結構計算，輸出框架、柱配筋圖及內力計算結果

關鍵詞 :畢業設計，圖書館，建筑設計，結構設計，框架結構。

Jiangsu University Library of Medicine frame structure design

ABSTRACT :The Graduation Project Topic Jiangsu University Library of Medicine frame structure design .The office building of four floors, the main four. All layers are 3.60 meters high, the total building height of 21.6meters.

The design includes the design of building structures. Building structure design part of the calculation of the main content of the book was initially identified component size, the calculation diagram of the frame, load lateral sway calculation framework of the internal forces in the horizontal and vertical load analysis and calculation of internal force combination of cross-sectional design and infrastructure design. Bottom scissors calculate the horizontal seismic force, Moment Distribution method used to calculate the vertical loads.

Computing, structural layout first PKPM software, check the flat data input times slab input load data, the formation of PK files, painting and structure plan; then use the PK framework for computing the spatial structure of the framework; Finally, the TAT software calculation, output frame, column reinforcement diagram and internal force calculation results

Key words :architectural design  library graduate design structural design office building .