1.62萬字               31頁

摘要：層狀結構的過渡金屬硫、硒化物作為固體潤滑劑一直備受人們關注。近年來，對該類納米材料的研究逐漸興起。據研究，二硒化鉬具有具有很好的摩擦性能,隨著對納米硒化物的研究的開展和深入,發現納米硒化物及其復合材料具有更好的摩擦性能。而且石墨烯具有與二硒化鉬類似的結構，具有良好的摩擦性能。以石墨烯為基體,將二硒化鉬沉積在石墨烯上，從而實現軟質材料與硬質材料的結合，增加材料的使用壽命。

   本文主要對石墨烯/MoSe2納米復合材料的制備工藝和摩擦學性能等問題進行初步探索。主要內容包括:

(1)采用水熱法合成二硒化鉬，通過對于硒鉬比、反應溫度、表面活性劑及后續處理的調整，從而實現對于二硒化鉬微觀形貌的優化，合成了納米花狀片層結構的二硒化鉬。對所合成的納米材料分別用TEM、SEM等方法進行了結構、形貌和成分的測試和表征。

(2)將制備二硒化鉬的鉬源、硒源及還原劑加入用PVP修飾的分散均勻的氧化石墨溶液中，通過水熱法一步合成石墨烯/二硒化鉬復合材料。所制備的二硒化鉬實現了軟質材料二硒化鉬與硬質材料石墨烯之間的復合，二硒化鉬均勻沉積在石墨烯片層上。并對所合成的納米復合材料采用掃描電鏡對其結構、形貌及成分進行測試和表征。

(3)將所制備的二硒化鉬及其復合材料作為潤滑油添加劑，在在UMT-2多功能摩擦試驗機上進行了不同條件的摩擦學試驗,研究了載荷、轉速對摩擦系數的影響,并對比了其摩擦性能的不同，并且對摩擦機理進行了探究。

關鍵詞：MoSe2；石墨烯；納米復合材料；摩擦性能

Abstract

Transitional metal dichalcogenides MX2 have lamellar close-packed hexagonal structures, which was used as solid lubricants extensively.According to the recent research ,molybdenum selenide has good friction properties ,besides,with the further researches have been done,It is clear that nano selenium compounds and composites have better friction properties.

In addition,graphene,Which has a similar structure with molybdenum selenide ,has good frictional properties.In order to length materials’service life,the molybdenum selenide is deposited on graphene substrate,which combine a soft material with a hard material.

In this article,experimental investigation and theoretical analysis were carried out on the preparation process and tribology properties of graphite/MoSe2 nano composites.

Firstly, MoSe2 is prepared by the hydrothermal method .By adjusting the ratio of Selenium and molybdenum ,reaction temperature,Surfactant and subsequent processing ,the optimization of MoSe2 has been achieved. Then nano-flower-like lamellar MoSe2 was synthesized.The products’ component and microstructure of MoSe2 nanostructure were investigated by means of X-ray diffraction (XRD) and scanning electronic microscope (SEM).

Secondly, the molybdenum source, selenium source and reducing agent are added into PVP-modified graphite oxide solution,graphite/MoSe2 composite is synthesized by hydrothermal method.The composites’component and microstructure of composite nanostructure were investigated by means of  scanning electronic microscope (SEM).

 At last,the tribological properties of products added as additives in 150bn base oil were investigated by UMT-2 multi-specimen tributester under determinate condition. 

Researches have done to test the influence of load and rotating speed have on the friction coefficient and comparisons were made between these additibes.In addition, friction mechanism was explored.

Keywords: MoSe2 ;graphene ; nanocomposites; friction performance

 

第一章 緒論

1.1 摩擦學的研究背景和意義

摩擦學是上個世紀印年代中期在英國創立的一門主要研究相對運動的表面上摩擦、磨損與潤滑現象的產生、變化與發展的規律及其控制與應用的科學與技術。摩擦學研究的主要內容是摩擦、磨損和潤滑，其主要任務就是要控制摩擦和磨損，改善潤滑，以達到節能、節材、降耗和減排的目的。生活中摩擦現象無處不在，如果世上沒有摩擦現象，那么將會寸步難行。

摩擦、磨損和潤滑問題已成為許多技術部門日常遇到的最普遍、最重要的問題。有人估計，世界上使用的能源大約有功~班消耗于摩擦，