基于PLC的輸電線路自動重合閘系統設計



20000多字   39頁



摘  要


隨著可編程序控制器(PLC)技術的發展，由于其高可靠性、高性價比、廣泛的工業現場適應性和方便的工藝擴展性能，PLC在電力系統的控制過程中得到了越來越廣泛的應用。目前，可編程邏輯控制器（PLC）的應用，解決了存在的諸多問題。PLC功能強大，以它為自動控制的核心，能夠?qū)⑦壿嬁刂?、過程控制和運動控制這三控集于一體，可方便、靈活地組合成不同規模和需求的控制系統，以實現現代多功能自動控制。

現代電力系統日趨復雜,電壓等級的升高,系統出現問題的可能性比以往有所增加,因此,必須有足夠的措施保障系統的安全,將電力系統出現故障時所造成的損失減到最低,繼電保護技術是各種安全措施保護功能中最為重要的一種。高壓輸電線路自動重合閘功能作為電力系統繼電保護裝置保護功能的重要組成部分。它在保證系統安全、穩定和經濟運行等方面起著非常重要的作用。

針對輸電線路常出現暫時性的故障，為提高供電的可靠性，在線路上須裝設自動重合閘裝置。為保證觸頭開斷過程的電弧總能量最小，要求實行定相合閘，通過芯片KJ008在獲取電壓的過零信號后產生觸發脈沖，選用FX2N-32MR型PLC為控制模塊，編寫PLC程序，控制斷路器的合閘時刻。

關鍵詞：自動重合閘；可編程邏輯控制器


 


 


 


 


 




 

Abstract


With the development of technology of programmable logic controller, and because of its high reliability, high ratio of performance to price, PLC has found more and more broad adaptability in industry spot and convenient technique expansibility, so PLC become more and more abroad in the automation process control in high-voltage breaker. At present, the programmable logical controller (PLC) application has solved existence many problems. Programmable Logic Controller (hereafter abbreviated as PLC), has powerful functions. As a core of automation of power system, it combines logic control, process control and motion control, and can be easily and flexibly organized into a control system on different scales to meet various requirements. So, the control system is multi-functional and modern.

With the modern electric system becoming more complicated and voltage grade keeping elevated，the probability that system comes forth some problems is increasing. Therefore, it is necessary for us to take adequate measures to ensure the security of the system and minimize the loss when the system fails to function. Relay protection technique is the most important one among diversified safety precautions. As the important part of relay protection devices, the high-voltage transmission line auto-reclosing function acts as the crucial role in system safety, stability and economical running.

For transmission lines often appeared a temporary failure, to improve power supply reliability, on-line on the installation of automatic reclosing devices. To ensure that the process of breaking contact arc total energy minimum, called for the zeros closing phase, through the chip KJ008 in obtaining the zero voltage signal after the trigger pulse, optional FX2N-32MR-PLC for the control module, prepared by the PLC program, the closing moments is set.

Keyword: automatic reclosing device;programmable logic controller


 




 

目 錄


第一章 緒論 1

1.1  課題的提出及研究的意義 1

1.2  自動重合閘的發展狀況 2

1.3  PLC控制技術的應用 2

第二章 自動重合閘裝置的方案選擇 4

2.1  國內外自動重合閘的發展歷史 4

2.2  自動重合閘裝置的工作原理 5

2.3  自動重合閘的作用 7

2.4  自動重合閘的類型 7

2.5  高壓線路自動重合閘啟動方式 8

2.6  對自動重合閘裝置的基本要求 9

2.7  單重、三重及綜重區別與特點 10

2.7.1 線路單重、三重及綜重的條件 10

2.7.2 單重與三重的優點、缺點比較 11

2.8  什么叫重合閘前、后加速 12

2.9  自動重合閘的配置原則 12

第三章 自動重合閘裝置的硬件設計 13

3.1  PLC的發展歷史 13

3.2  PLC的組成 14

3.3  FX2N-32MR的工作原理 15

3.3.1 FX2N-32MR系統結構圖 15

3.3.2 FX2N-32MR的特點 16

3.3.3 FX2N-32MR的工作原理 16

3.4 PLC編程語言 18

3.5 可編程序控制器控制系統的設計和調試步驟 20

3.6 硬件框圖 22

3.7  主要組成部分的說明 24

3.7.1電壓互感器 24

3.7.2電壓過零觸發器 25

3.7.3 PLC在自動重合閘裝置中的應用 27

3.8 硬件接線圖 29

第四章 自動重合閘裝置的軟件設計 30

4.1 控制過程分析 30

4.2 自動重合閘PLC的控制程序設計 31

結束語 34

參考文獻 35

謝  辭 36