4LZ-1200型水稻聯合收割機撥禾機構設計

[摘要]:我國是農業大國，水稻生產機械化對水稻種植至關重要，水稻聯合收割機是實現水稻收割機械化的重要工具，而水稻聯合收割機小型化、微型化是在南方山區、丘陵地區實現農業機械化的關鍵。因此，研究小型水稻聯合收割機具有重要的現實意義。
本文分析了現有的聯合收割機在南方山區、丘陵地區使用時存在的問題，對聯合收割機的偏心撥禾輪的功率耗用作了較深的研究，研究開發具有自主知識產權的4LZ—1200型全喂入水稻聯合收割機。
首先，采用特殊的全喂入脫粒形式，將現有聯合收割機的割臺、輸送、脫粒機三大部分簡化一體，大大地簡化聯合收割機的結構，從而使聯合收割機小型化、微型化。
實驗證明，本文設計的4LZ—1200型全喂入水稻聯合收割機的各項性能指標均達到或超過了國家標準。

[關鍵詞]：全喂入水稻聯合收割機;撥禾機構;

Design poking grain mechanism of 4LZ-1200 Combine harvester

[ABSTRACT]The mechanization for harvesting rice crop products is very important in our country, a large agricultural country. The combine is one of main tools to achieve mechanization for harvesting rice crop product. In southern mountainous area and hilly area, the micro and mini combines play important role for harvesting grain products. So it is worth to study the mini combine.
In this paper, some existing problems with using combines in southern mountainous area and hilly area were analyzed. And the eccentric poking grain wheel of the thresher of the combine have been researched deeply. A 4LZ-1200 Entire-feed-carrier combine harvester with self-copyright for grain crop has also been studied.
Firstly, the three parts of the combine, cutting, transporting and threshing parts, were simplified into account by adopting special Entire feed carrier threshing style, and largely simplified the structure of the combine, thereby make it become micro and mini.
The experiment results showed that the target aim of 4LZ—1200 Entire-feed-carrier combine have been reached or even exceeded the national criterion. The product has gained the state patent.

[KEYWORDS] Entire-feeding combine; poking grain mechanism
 
目錄
第一章 緒論 1
1.1我國水稻生產概況 1
1. 2全喂入水稻聯合收割機的現狀和發展趨勢 1
1.2.1水稻收獲機械的發展慨況 1
1.2.2國內外全喂入水稻聯合收割機的現狀及發展趨勢 2
1.3小型全喂入水稻聯合收割機的研究意義 4
1.3.1在中國農村現實經濟條件下引進國外產品的困難 4
1.3.2國內全喂入水稻聯合機的不足 4
1.3.3小型全喂入水稻聯合收割機的研究意義 5
第二章 偏心撥禾輪機構的分析 7
2. 1引言 7
2.2偏心撥禾輪機構結構設計 7
2.3撥禾輪的工作原理 9
2. 3.1 撥板的運動分析 9
2.3.2撥禾輪正常工作的條件 10
2.3.3撥禾輪工作過程 10
2.4撥禾輪主要性能參數的確定 11
2.4.1撥禾輪的轉速 11
2.4.2撥禾輪的直徑 12
2.4.3撥禾輪的作用程度 13
2.4.4撥禾輪的功率消耗 14
第三章 總結 15
致謝 16
[參考文獻] 17