沖壓成形與板材沖壓 外文翻譯.doc
約10頁DOC格式手機打開展開
沖壓成形與板材沖壓 外文翻譯,1.the article overviewstamping is a kind of plastic forming process in which a part is produced by means of the plastic forming the material under the action of...
內容介紹
此文檔由會員 wanli1988go 發布
1.The article overview
Stamping is a kind of plastic forming process in which a part is produced by means of the plastic forming the material under the action of a die. Stamping is usually carried out under cold state, so it is also called stamping. Heat stamping is used only when the blank thickness is greater than 8~100mm. The blank material for stamping is usually in the form of sheet or strip, and therefore it is also called sheet metal forming. Some non-metal sheets (such as plywood, mica sheet, asbestos, leather)can also be formed by stamping.
Stamping is widely used in various fields of the metalworking industry, and it plays a crucial role in the industries for manufacturing automobiles, instruments, military parts and household electrical appliances, etc.
The process, equipment and die are the three foundational problems that needed to be studied in stamping.
The characteristics of the sheet metal forming are as follows:
(1) High material utilization
(2) Capacity to produce thin-walled parts of complex shape.
(3) Good interchangeability between stamping parts due to precision in shape and dimension.
(4) Parts with lightweight, high-strength and fine rigidity can be obtained.
(5) High productivity, easy to operate and to realize mechanization and automatization.
1.概述
通過模具使板材產生塑性變形而獲得成品零件的一次成形工藝方法叫做沖壓。由于沖壓通常在冷態下進行，因此也稱為冷沖壓。只有當板材厚度超過8~100mm時，才采用熱沖壓。沖壓加工的原材料一般為板材或帶材，故也稱板材沖壓。某些非金屬板材（如膠木板、云母片、石棉、皮革等）亦可采用沖壓成形工藝進行加工。
沖壓廣泛應用于金屬制品各行業中，尤其在汽車、儀表、軍工、家用電器等工業中占有極其重要的地位。
沖壓成形需研究工藝設備和模具三類基本問題。
板材沖壓具有下列特點：
（1）．高的材料利用率。
（2）．可加工薄壁、形狀復雜的零件。
（3）．沖壓件在形狀和尺寸方面的互換性好。
（4）．能獲得質量輕而強度高、剛性好的零件。
（5）．生產率高，操作簡單，容易實現機械化和自動化。
Stamping is a kind of plastic forming process in which a part is produced by means of the plastic forming the material under the action of a die. Stamping is usually carried out under cold state, so it is also called stamping. Heat stamping is used only when the blank thickness is greater than 8~100mm. The blank material for stamping is usually in the form of sheet or strip, and therefore it is also called sheet metal forming. Some non-metal sheets (such as plywood, mica sheet, asbestos, leather)can also be formed by stamping.
Stamping is widely used in various fields of the metalworking industry, and it plays a crucial role in the industries for manufacturing automobiles, instruments, military parts and household electrical appliances, etc.
The process, equipment and die are the three foundational problems that needed to be studied in stamping.
The characteristics of the sheet metal forming are as follows:
(1) High material utilization
(2) Capacity to produce thin-walled parts of complex shape.
(3) Good interchangeability between stamping parts due to precision in shape and dimension.
(4) Parts with lightweight, high-strength and fine rigidity can be obtained.
(5) High productivity, easy to operate and to realize mechanization and automatization.
1.概述
通過模具使板材產生塑性變形而獲得成品零件的一次成形工藝方法叫做沖壓。由于沖壓通常在冷態下進行，因此也稱為冷沖壓。只有當板材厚度超過8~100mm時，才采用熱沖壓。沖壓加工的原材料一般為板材或帶材，故也稱板材沖壓。某些非金屬板材（如膠木板、云母片、石棉、皮革等）亦可采用沖壓成形工藝進行加工。
沖壓廣泛應用于金屬制品各行業中，尤其在汽車、儀表、軍工、家用電器等工業中占有極其重要的地位。
沖壓成形需研究工藝設備和模具三類基本問題。
板材沖壓具有下列特點：
（1）．高的材料利用率。
（2）．可加工薄壁、形狀復雜的零件。
（3）．沖壓件在形狀和尺寸方面的互換性好。
（4）．能獲得質量輕而強度高、剛性好的零件。
（5）．生產率高，操作簡單，容易實現機械化和自動化。
