摘要

JT系列提升絞車可供煤礦、金屬礦、非金屬礦在傾斜巷道作升降物料和人員之用，也可作為小型豎井的提升設備。據制造工藝的不同，可把提升機的滾筒結構分為鑄造一焊接混合型(支輪為鑄造，滾筒為焊接)和焊接型。

機械傳動系統包括減速器和聯軸器,礦井提升機主軸的轉數由于受提升速度的限制，一般在l0一60轉／|分之間，而用作拖動的電動機的轉數，一般在480一960轉／分之間。這樣，除采用低速直流電動機拖動外，一般情況下不能將主軸與電動機直接聯接，中間必須經過減速器。因而減速器的作用是減速印傳遞動力。聯軸器由半聯軸器、柱銷等零件組成。由于柱銷具有緩沖和減震作用，因而具有傳動平穩、噪音小、安全可靠、易于維護等優點。主軸與減速器輸出軸的連接采用齒式聯軸器。

潤滑系統是一切機械系統中很重要的一個環節。潤滑系統的作用是：在提升機工作時，不間斷地向主軸承、減邊器軸承和嚙合齒面壓送潤滑油，以保證軸承和齒輪能良好的工作潤滑系統必須與自動保護系統和主電動機聯鎖

電動機通過主軸驅動滾筒．主軸也是傳動的主要部件。提升絞車主軸應能承受工作過程中的外負荷而不發生殘余變形和過量的彈性變形，同時要保證一定的使用壽命。主軸往往是提升機中重量最大的一個零件，其尺寸和傳遞的力矩也較大。

關鍵詞：提升絞車 減速器 聯軸器 主軸

Abstract

JT Series hoist for coal, metal mining, non-metallic mineral movements in the tilt of roadway materials and personnel for use in small shaft can also be used as the upgrading of equipment. According to the different manufacturing process which could take the drum hoist structure casting a hybrid welding (support wheel for the casting, roller for welding) and the welding-type.

Reducer and the mechanical transmission system including the coupling, the main axis of mine hoist to raise the speed of a few because of the restrictions, generally 60 to 1 l0 / | between points, and the motor used to drag a few, generally 480 a 960 r / min between. In this way, in addition to the use of low-speed DC motor drag outside, under normal circumstances can not be directly connected to the motor spindle with the middle through reducer. Reducer thus slow down India's role is to transfer power. Coupling by the semi-coupling and column component parts inventory. Sales as a result of column buffer and shock-absorbing role, so they have a smooth drive, the noise of small, safe, reliable, easy to maintain and so on. Spindle and the reducer output shaft gear coupling used to connect.

Lubrication of all mechanical systems is a very important aspect. Lubrication system is: in the elevator work, uninterrupted to the main bearings, bearings and browser side by tooth meshing Pressure lubricants, bearings and gears in order to ensure the work can be a good lubrication system with automatic protection systems and the main electrical interlock

Drum through the spindle drive motor. Spindle drive is also the main components. Spindle hoist should be able to work outside the course of the load without the occurrence of excessive residual deformation and elastic deformation, at the same time to ensure that a certain life. Spindle is often the weight of hoisting machine in one of the biggest parts of their size and the torque delivery as well.

Key words: spindle  hoist  reducer  coupling

目 錄 

緒   論 - 1 -

第1章  礦井提升的意義及其發展簡史 - 2 -

第2章 JT-0.8礦井提升絞車的工作原理 - 4 -

礦井提升機—（1）單繩纏繞式— a單卷筒提升機 - 4 -

第3章  JT-0.8提升絞車提升設備的分類 - 6 -

第4章  JT-0.8提升絞車主要組成部分和各部分的用途 - 7 -

4.1 提升機械性能參數 - 7 -

4.2 制動系統 - 8 -

4.3 機械傳動系統 - 10 -

4.4 潤滑系統 - 10 -

4.5 觀測和操縱系統 - 11 -

4.6 拖動、控制和自動保護系統 - 12 -

第5章 JT-0.8提升絞車卷筒的結構及其計算 - 19 -

5.1卷筒結構 - 19 -

5.2支輪 - 21 -

5.3木襯 - 23 -

5.4繩槽 - 24 -

5.5卷筒的失效形式及原因 - 27 -

5.6 筒殼許用應力的確應 - 28 -

5.7 滾筒強度的驗算 - 30 -

第6章  JT-0.8提升絞車的主軸設計 - 32 -

6.1主軸的結構設計 - 32 -

6.2 主軸尺寸的確定及軸承的選擇 - 33 -

6.3 主軸裝置零部件變位質量計算 - 36 -

6.3-1確定滾殼變位質量 - 37 -

6.3-2確定支輪變位質量 - 38 -

6.3-3 確定輪轂的變位質量 - 39 -

6.4主軸強度和剛度計算及校核 - 40 -

6.4-1 固定靜載荷分配于主軸各輪轂作用點上的力 - 41 -

6.4-2 鋼絲繩拉力分配于主軸各輪轂作用點上的力 - 44 -

6.4-3 作用于軸上水平方向及垂直方向的合力 - 46 -

6.4-5扭矩計算 - 48 -

6.4-6危險斷面的安全系數計算 - 49 -

6.4-7按彎扭組合校核強度 - 51 -

6.4-8撓度計算 - 52 -

6.5主軸承強度校核 - 56 -

6.6滾筒制動輪與主軸的過盈配合聯接計算 - 56 -

6.6-1 計算最小過盈量 - 57 -

6.6-2  計算最大過盈量 - 58 -

6.6-3 選擇過盈配合的種類 - 59 -

結 束 語 - 32 -

參考文獻 - 55 -