畢業設計 8刀自動刀架系統設計
論文說明書共36頁，字?jǐn)?shù)總計：16125
資料簡介：
A2-刀盤.dwg
A3-蝸桿軸.dwg
A3-螺桿.dwg
A3-蝸輪.dwg
A3-端蓋.dwg
A0-刀架裝配圖.dwg
畢業設計（論文）說明書：8刀自動刀架系統設計.doc
文獻綜述.doc
摘 要

數控加工的加工精度高，生產率高，能減輕操作者勞動強度、改善勞動條件，有利于生產管理的現代化以及經濟效益的提高，它的發展和運用，影響著制造業水平高低，實現生產過程的數控化，已經成為當今制造業的發展方向，所以非常值得我們?nèi)パ芯俊?br>本設計通過對八工位臥式電動控制刀架的工作原理的分析，確定了多種方案，綜合考慮各種方案的優缺點、性價比后，采用電動回轉刀架。其刀架機構的主要部件包括減速傳動機構、刀架的抬起機構、鎖緊與轉位精定位機構等，控制系統軟件包括控制系統的選擇，控制系統軟硬件的設計，收發信電路的設計等，設計中所采用螺桿抬起機構、端齒盤定位機構和單片機控制系統都計較經濟實用，適合我們我國現階段數控機床的發展需要。


關鍵詞 八工位，電動刀架，自動化，8051單片機

ABSTRACT

The numerical control processing's working accuracy is high, the productivity is high, can reduce the operator labor intensity, the improvement work condition, is advantageous in production management modernization as well as the economic efficiency enhancement, its development and the utilization, are affecting the manufacturing industry horizontal height, realizes the production process numerical control, already became now the manufacturing industry development direction, therefore is worth us studying. this design through to eight location horizontal type electric control tool rest's principle of work's analysis, had determined many kinds of plans, after overall eva luation each kind of plan good and bad points, performance-to-price ratio, uses the electrically operated turret saddle. Its tool rest organization's major component including the reduction gear organization, the tool rest lifts the organization, to lock and to index the fine detent mechanism and so on, the control system software including control system's choice, the control system software and hardware's design, receives transmitting circuit's design and so on, in the design uses the screw rod to lift the organization, the end tooth plate detent mechanism and the monolithic integrated circuit control system haggles over the economy to be practical, suits our our country present stage numerically-controlled machine tool's development need. key word eight locations, electrically operated tool rest, automation, 89C51 monolithic integrated circuit.


Keywords eight locations, electrically operated tool rest, automation, 8051 monolithic integrated circuit.

目 錄
摘要 I
ABSTRACT II

1 緒論 1
1.1 引言 1
1.2 國內外研究現狀 1
1.3 存在的問題 2
1.4 解決的方法 3
2 方案設計 4
2.1 自動刀架的基本要求和類型 4
2.1.1自動刀架的基本要求 4
2.1.2自動刀架的類型 4
2.2 方案的擬定和確定 5
3 總體結構設計 7
3.1 減速傳動機構方案設計 7
3.2 刀架抬起機構設計 8
3.3 上刀體鎖緊與精定位機構設計 8
4 主要部件的設計計算 11
4.1 減速傳動機構的設計計算 11
4.1.1蝸桿的選型 11
4.1.2蝸桿副的材料選擇 11
4.1.3按齒面接觸疲勞強度進行設計 11
4.1.4蝸桿和蝸輪的主要參數與幾何尺寸 14
4.1.5校核蝸輪齒根彎曲疲勞強度 15
4.2 螺桿的設計計算 16
4.2.1螺距的確定 16
4.2.2其他參數的確定 16
4.2.3自鎖性能校核 16
4.3 端齒盤設計 17
4.3.1 端齒盤的特點 17
4.3.2 端齒盤主要參數的設計計算 18
5 電氣控制部分設計 21
5.1 控制系統的選擇 21
5.2 控制方式的選擇 22
5.3 硬件電路設計 22
5.3.1收信電路設計 22
5.3.2發信電路設計 23
5.4 控制軟件設計 25
結論 30
參考文獻 31
致謝 32