銑床升降臺零件的分析工藝規程設計及鏜孔夾具的設計
2萬字 44頁
包括設計說明書，工序卡，工藝過程卡，5張CAD設計圖



摘 要
機械制造業在國民經濟中占有重要的地位，是一個國家或地區發展的重要支柱。其中的工藝學包括對一個零件在加工中的定位、夾緊及工藝路線制定、工序尺寸確定等問題。工序設計的合理性往往是提高勞動生產率及降低零件報廢率的主要因素。專用夾具設計的簡單化、高效化和經濟合理化是保證加工質量的前提條件。當前，制造工藝技術正向高精度、高效率、低成本、高智能化和潔凈化等方面趨勢發展。
本篇論文共包括：銑床升降臺零件的分析、工藝規程設計及鏜孔夾具的設計三大部分。

關鍵詞：工藝路線,鏜孔夾具


ABSTRACT
The mechanical manufacturing industry holds the important status in the national economy, is a national or the local development important prop. Technology including to a components in processing localization, clamps and the craft route formulation, the working procedure size firmly grades the question. The working procedure design rationality often is enhances the labor productivity and reduces the components condemnation factor the primary factor. The unit clamp designs the simplification, is highly effective and the economical rationalization is guarantees the processing quality the prerequisite. Presently, the manufacture craft technology to the high accuracy, the high efficiency, the low cost, the high intellectualization and is pure and so on the aspect tendency development.
This paper altogether includes: Milling machines with table of variable height with horizontal or vertical spindle-Testing component analysis, technological process design and boring jig design three major parts.

Key word: Craft route, boring jig


目 錄
中文摘要………………………………………………………………………………….…...Ⅰ
英文摘要……………………………………………………………………………………....Ⅱ
前言…………………………………………………………………………………………….1
第1章 零件的分析…….…....…………………………………………………………….....1
1.1 零件的作用…..........…………………………………………………………………......1
1.2 零件的工藝分析………......……………………………………………………………...1
第2章 工藝規程設計………...……………………………………………………………..2
2.1 確定毛坯制造形式……….………………………………………………………….…...2
2.2 基面的選擇…...……………...……………………………………………………..........2
2.3 零件表面加工方法的選擇….........……………………………………………….……….2
2.4 制定工藝路線…...……….……….…………………………………………….………...3
2.5 機械加工余量及毛坯尺寸的確定…....…….………………………………………………5
2.6 確定切削用量及基本工時…...…….……………………………………………………...6
第3章 夾具設計…...…………..………………………………………………….…….….31
3.1 問題的提出…......………………………………………………………………..…….31
3.2 夾具設計…...…...…...………………………………………………………..……….31
3.2.1定位基準的選擇……….……………………………………………………………31
3.2.2切削力及夾緊力的計算…....….……...……………………………………………..33
3.2.3定位誤差的分析…...………..………………………………………………...…….33
3.2.4夾具設計及操作的簡要說明…....….…...…………………………………...............33
結論…………………………………………………………………………………………...34
參考文獻………………………………………………………………………………….......35
致謝…………………………………………………………………………………...............36



參 考 文 獻
[1] 李洪.機械加工工藝手冊[M].北京:北京出版社,1992.8
[2] 東北重型機械學院,洛陽工學院,第一汽車制造廠職工大學.機床夾具設計手冊(第二版)[M].上?？茖W(xué)技術出版社.1990.2.
[3] 孟少農.機械加工工藝手冊(第一卷)[M].機械工業出版社.1991.6
[4] 張耀宸.機械加工工藝設計實用手冊.航空工業出版社[M].1993.12
[5] 李益民.機械制造工藝設計簡明手冊[M].機械加工出版社.1984.8
[6] 趙家齊.機械制造工藝學課程設計指導書[M].機械工業出版社,1991.9
[7] 邱宣懷.機械設計(第四版)[M].高等教育出版社.2003.4
[8] 吳宗澤,羅圣國.機械設計課程設計手冊(第二版)[M].高等教育出版社,2004.8
[9] 哈爾濱工業大學理論力學教研室.理論力學[M].高等教育出版社