基于USB6009DAQ頻率特性測試儀的設計


頁數：30 字?jǐn)?shù)：12557

摘 要
頻率特性測試儀簡稱掃頻儀，是一種根據掃頻測量法原理組成的分析電路頻率特性的電子測量儀器，主要用于電路頻率特性的測試。它是一種把掃頻信號發生器和示波器結合起來的測試儀器。虛擬頻率特性測試儀，由數據采集設備中D／A 功能單元產生的激勵信號作用于待測系統或網絡(電路)，得到的響應信號經數據采集設備中的A／D功能單元采集后送入計算機，以對應于各種不同種類激勵，響應信號的算法(應用程序)進行處理，最后給出系統頻率特性。
傳統掃頻儀不僅價格昂貴，體積寵大，而且只能顯示幅頻特性曲線，不能得到相頻特性曲線， 更不能打印被測網絡的頻響曲線，給使用者帶來諸多不便。虛擬頻率特性測試儀要比傳統的電子儀器更為通用，在組建和改變儀器的功能和技術性能方面更為靈活、更為經濟，更能適應迅猛發展的當代科學技術對測量技術和測量儀器不斷提出的更新并擴展功能與性能的要求。
基于USB6009DAQ頻率特性測試儀的設計共分三個部分。第一部分，介紹頻率特性測試儀器的原理和應用；第二部分，虛擬頻率特性測試儀設計，介紹虛擬儀器的特點和軟硬件構建；用LabVIEW設計了測試儀的前面板和流程圖，實現USB6009DAQ卡輸出正弦信號和采集電路響應的功能；第三部分，給出測試高、低、帶通濾波電路的結果和步驟。
關鍵詞：LabVIEW，虛擬儀器，數據采集，頻率特性測試儀



Abstract
The design of the frequency characteristic measurer based

Abstract: The frequency characteristic tester is called shortly sweeps frequency device, is one kind of basis sweeps the frequency to measure the menstruation principle composition the analysis channel frequency characteristic electronic surveying instrument, mainly uses in the channel frequency characteristic test. It is one kind sweeps the measuring instrument, which the frequency signal generating device and the oscilloscope unifies. The hypothesized frequency characteristic reflect scope reflector, the drive signal which D/the A function unit produces by the data acquisition equipment in affects treat to measure the system or the net green electric circuit), obtains response signal sends in the computer after data acquisition equipment in A/D function unit gathering, corresponds to each kind of different type drove, responds the signal the algorithm (application procedure) to carry on processing, finally produces the system transient output response.
The tradition sweeps the frequency meter not only the price expensively, the volume favors in a big way, moreover only can demonstrate the amplitude frequency characteristic, cannot obtain the frequency characteristic curve, cannot print was measured the network the frequency sound curve, brings to the user many is inconvenient. The hypothesized frequency characteristic tester must compared to the traditional electronic instrumentation more general, is setting up and changes the instrument the function and the technical performance aspect more nimble, is more economical, can adapt the swift and violent development present age science and technology to survey the renewal and the expansion function and the performance request which the technology and the metering equipment unceasingly proposed.
Supposes based on the USB6009DAQ frequency characteristic tester in all divides three parts. First part, introduction frequency characteristic measuring instrument principle and application; The second part, the hypothesized frequency characteristic tester design, introduced the hypothesized instrument the characteristic and the software and hardware construct; Has designed the tester front panel and the flow chart with LabVIEW, realizes function which the USB6009DAQ card output sine signal and the gathering electric circuit responds; The third part, produces tests high, is low, the band-pass circuit result and the step.
Key Word: LABVIEW, Virtual Instrument, Data Acquisition, the Frequency characteristic tester.


目次
摘 要 I
ABSTRACT II

1 引言 1
2 頻率特性測試儀 2
2.1系統的頻率特性分析 2
2.2 頻率特性測試儀概念 2
2.3 頻率特性的基本測量方法 2
2.4 頻率特性測試儀的工作原理 3
2.5 頻率特性測試儀的主要應用 4
3 虛擬頻率特性測試儀設計 7
3.1虛擬儀器 7
3.2 USB6009DAQ 簡介 11
3.3 虛擬頻率特性測試儀的功能和結構 12
3.4 虛擬頻率特性測試儀軟件設計 12
3.5 程序的調試 18
3.6 測試步驟和結果 18
4 結論與展望 24

致謝 25
參考文獻 26