基于51單片機電子萬年歷畢業論文


摘  要：
電子萬年歷是一種非常廣泛日常計時工具，對現代社會越來越流行。它可以對年、月、日、周日、時、分、秒進行計時，還具有閏年補償?shù)榷喾N功能，而且DS1302的使用壽命長，誤差小。對于數字電子萬年歷采用直觀的數字顯示，可以同時顯示年、月、日、周日、時、分、秒和溫度等信息，還具有時間校準等功能。該電路采用AT89S52單片機作為核心，功耗小，能在3V的低壓工作，電壓可選用3~5V電壓供電。
本設計是基于51系列的單片機進行的電子萬年歷設計，可以顯示年月日時分秒及周信息，具有可調整日期和時間功能。在設計的同時對單片機的理論基礎和外圍擴展知識進行了比較全面準備。在硬件與軟件設計時，沒有良好的基礎知識和實踐經驗會受到很大限制，每項功能實現時需要那種硬件，程序該如何編寫，算法如何實現等，沒有一定的基礎就不可能很好的實現。在編寫程序過程中發現以現有的相關知識要獨自完成編寫任務困難重重，在老師和同學的幫助下才完成了程序部分的編寫。
萬年歷的設計過程在硬件與軟件方面進行同步設計。硬件部分主要由AT89C52單片機，LED顯示電路，以及調時按鍵電路等組成。在單片機的選擇上本人使用了AT89C52單片機，該單片機適合于許多較為復雜控制應用場合。顯示器使用2片7SEG-MPX8-CA和一片7SEG-MPX4-CA。7SEG-MPX8-CA是一種八個共陽二極管顯示器，7SEG-MPX4-CA是一種四個共陽二極管顯示器。為了能更輕松的控制這三片顯示器，本人使用了3片74HC164來驅動。74HC164 是 8 位邊沿觸發式移位寄存器，串行輸入數據，然后并行輸出。軟件方面主要包括日歷程序、時間調整程序，公歷轉陰歷程序，顯示程序等。程序采用匯編語言編寫，以便更簡單地實現調整時間及陰歷顯示功能。所有程序編寫完成后，在wave軟件中進行調試，確定沒有問題后，在Proteus軟件中嵌入單片機內進行仿真。最后總在老師同學的幫助以及自己的努力下完成了此次電子萬年歷的設計。
關鍵詞：

Abstract

 E-calendar day time is a very wide range of tools, increasingly popular in modern society. It can be year, month, day, Sunday, hours, minutes, seconds for time, but also has a leap year compensation to a variety of functions, and the DS1302's long life, small error. For the digital electronic calendar using an intuitive digital display can simultaneously display year, month, day, Sunday, hours, minutes, seconds, and temperature and other information, but also a time-calibration and other functions. The circuit uses AT89S52 microcontroller as the core, power consumption, low-voltage work in 3V, the voltage can choose 3 ~ 5V voltage supply.
The design is based on 51 series of microcontrollers to the design of electronic calendar, you can display date information on when the minutes and seconds, and weeks, with adjustable date and time functions. At the same time in the design of the theoretical basis of the MCU and peripheral expansion of knowledge of the more comprehensive preparation. The hardware and software design, there is no good basic knowledge and practical experience will be greatly limited, each feature is required to achieve the kind of hardware, procedures, how to write, how to implement such algorithms, there is no certain foundation can not be good implementation. Found during the preparation process to the existing knowledge to complete the preparation of the task alone difficult,
In the help of teachers and students to complete the program part of the preparation.
Calendar of the design process in hardware and software to synchronize the design. Hardware mainly by the AT89C52 microcontroller, LED display circuit, and the tune composed of the circuit when the button. In the SCM choice I used the AT89C52 microcontroller, which is suitable for many of the more complex control applications. Monitor the use of two 7SEG-MPX8-CA and a 7SEG-MPX4-CA. 7SEG-MPX8-CA is a total of eight-yang diode display, 7SEG-MPX4-CA is a total of four-yang diode display. In order to more easily control the three monitors, I use three 74HC164 to drive.
74HC164 is an 8-bit edge-triggered shift register, serial input data, and parallel output. The software includes calendar program, time to adjust procedures, turn the lunar calendar programs, display programs. Programs written in assembly language used in order to more easily adjust the time and the realization of the lunar calendar display. All programming is complete, the wave software debugging, make sure that no problems, in the Proteus software within a microcontroller embedded in the simulation. The final overall the teacher to help students, as well as their own efforts to complete the design of the electronic calendar.
Keywords:
        Clock electric clock:DS1302；DS18B20:Dynamic scan:scm

~~~~~~目錄~~~~~~

一、設計要求與方案論證 ………………………………………………………………………4
1.1 設計要求 ……………………………………………………………………………………4
1.2 系統基本方案選擇和論證 …………………………………………………………………4
1.2.1單片機芯片的選擇方案和論證 …………………………………………………………4
1.2.2 顯示模塊選擇方案和論證 ………………………………………………………………4
1.2.3 時鐘芯片的選擇方案和論證 ……………………………………………………………4
1.2.4 溫度傳感器的選擇方案與論證 …………………………………………………………5
二.系統的硬件設計與實現………………………………………………………………………5
2.1 電路設計框圖 ………………………………………………………………………………5
2.2 系統硬件概述 ………………………………………………………………………………5
2.3 主要單元電路的設計 ………………………………………………………………………6
2.3.1單片機主控制模塊的設計 ………………………………………………………………6
2.3.2時鐘電路模塊的設計 ……………………………………………………………………6
2.3.3溫度采集模塊設計 ………………………………………………………………………7
2.3.4 電路原理及說明 …………………………………………………………………………7
2.3.5顯示模塊的設計 …………………………………………………………………………8
三、系統的軟件設計 ……………………………………………………………………………9
3.1程序流程框圖 ………………………………………………………………………………9
3.2 子程序的設計 ………………………………………………………………………………9
3.2.1 DS18B20溫度子程序 ……………………………………………………………………9
3.2.2 讀、寫DS1302子程序 …………………………………………………………………10
四. 指標測………………………………………………………………………………………11
4.1 測試儀器……………………………………………………………………………………11
4.2硬件測試……………………………………………………………………………………11
4.3軟件測試……………………………………………………………………………………11
4.４測試結果分析與結論………………………………………………………………………12
4.4.1 測試結果分析……………………………………………………………………………12
4.4.2 測試結論…………………………………………………………………………………12
五、作品總結……………………………………………………………………………………12
六、致謝詞………………………………………………………………………………………12
參考文獻…………………………………………………………………………………………13
附錄一：系統電路圖……………………………………………………………………………14
附錄二：系統程序清單…………………………………………………………………………15
附錄三：系統使用說明書………………………………………………………………………40