2000KN單動液壓機工作臺結構分析及優化設計（本科畢業論文設計）

摘    要

      液壓機是壓力加工的重要設備，已成為鍛造行業必不可少的設備之一。隨著新工藝及新技術的應用。液壓機在金屬加工及非金屬成形方面的應用越來越廣泛。
     論文在綜合了國內外液壓機資料，詳細分析了2000KN液壓機工作臺結構的強度和剛度的基礎上，對2000KN液壓機工作臺進行了結構優化設計，得出了強度和剛度符合要求且耗材最少的理想結果。
       論文以ANSYS有限元分析軟件為工具，合理處理載荷和約束，建立了2000KN液壓機工作臺的有限元模型，并對其進行了計算和分析。在分析結果的基礎上對工作臺進行了多次結構優化，并從中選出了最佳的優化方案。最終經過結構優化的工作臺比未優化重量減輕，節材明顯。
       從其運用ANSYS進行結構分析的效果來看，用ANSYS軟件來對工程設備進行結構分析的確是工程設計中有效的方法之一。

關鍵詞：液壓機，有限元，ANSYS，結構分析

ABSTRACT

    Hydraulic pressure is a major processing equipment, and has become one of the essential equipment of the forging industry. With the new process and new technology applications, the application of hydraulic pressure in the metal processing and non-metallic forming is more and more extensive.
   Papers in the Composite hydraulic machine at home and abroad, and detailed analysis of the 2000 KN hydraulic table , optimize the design of the  2000 KN hydraulic table , obtain a a desired results scheme  that strength and  rigidity  meet the requirements and need  material least.
   Papers uses ANSYS finite element analysis software as a tool for dealing with reasonable load and restraint, creats the finite element model of 2000 KN hydraulic pressure table, and its calculation and analysis. Analysis of the results in the table on the basis of a number of structural optimization, and from among the best optimization of the programme. At the end  the table that has been taken structural optimization lighten a lot of weight than the original table, saved a lot of material.
   From the results of  use ANSYS to structural analysis , use ANSYS software to analysis the engineering equipment for structural engineering is indeed effective in one of the ways.

Key words：Hydraulic Pressure，F(xiàn)inite Element Analysis，ANSYS , Structural Analysis 

目   錄
中文摘要 Ⅰ
ABSTRACT Ⅱ
1緒論 1
  1.1 液壓機設計方法發展概況 1
    1.1.1有限元分析方法 2
    1.1.2結構優化理論和應用 3
  1.2  課題的研究現狀 3
  1.3  選題的目的和意義 5
  1.4  本課題的主要任務 6
2 2000KN液壓機工作臺的建模 7
  2.1 概述 7
  2.2  建模步驟 7
    2.2.1外模型的建立 7
    2.2.2內模型的建立 8
    2.2.3工作臺模型的建立 12
  2.3  小結 14
3 模型的網格劃分及約束和載荷的施加 16
  3.1 網格劃分 16
 3.2 約束和載荷的施加 18
4 2000KN液壓機工作臺的有限元分析 21
4.1正載工況的有限元分析 22
4.2向右偏載工況的有限元分析 26
4.3向后偏載工況的有限元分析 27
4.4小結 29
5 2000KN液壓機工作臺結構優化設計 31
5.1概述 31
5.2 優化及分析 31
5.3 小結 40
6 總結 41
  6.1 本課題的研究成果 41
6.2 結論及展望 42
致謝 44
參考文獻 45