多路數據采集設計_機制專業

多路數據采集系統

摘 要：本系統是一個八路數據采集系統，控制過程利用電阻的串并聯輸入直流電壓，結合放大電路，A/D轉換電路，單片機最小控制系統等構成閉環系統。通過采樣將實際值輸出到單片機，由單片機進行控制8279，將采樣通道和電壓值相應數據顯示出來。
關鍵詞：多路數據采集，AT89S51單片機，模擬信號產生器

Multi-path data collect system

Abstract: This system adopt a octuplex data collect system , control procedure is the change-over circuit making use of resistant series-parallel connection to import direct current pressure , being tied in wedlock enlarging circuit , A/D , monolithic machine minimum navar waits to compose closed cycle system. Actual value is exported to monolithic machine by taking sample , is control 8279 from Single-chip Microcomputer go along, the corresponding with sampling passage and voltage value data display comes out.
Keywords: The multi-path data collect , AT89S51 Single-chip Microcomputer , analog signal produce an implement.

目 錄
一、 前言 
多路數據采集系統的構成……………………………………………….1

二、 系統方案設計
1、設計要求…………………………..…………………………………1
2、系統方案比較………………………………………………………..1

三、 硬件模塊設計
1、模擬信號采集系統的設計…………………………………………...2
2、A/D轉換電路設計…………………………………………………...3

四、軟件系統設計
1、A/D轉換過程………………………………………………………...6
2、顯示數據的存儲轉換………………………………………………...7
3、顯示電路程序流程…………………………………………………...7
4、具體編程思想………………………………………………………...7

五、系統調試
    1、A/D電路調試………………………………………………………....8
    2、數碼管顯示模塊調試………………………………………………....8
    3、各通道參數值調試……………………………………………………8

六、結論………………………………………………………………………..9

七、參考文獻…………………………………………………………………..9

附錄
    附1………………………………………………………………………..10
    附2………………………………………………………………………..10
    附3………………………………………………………………………..11
    附4………………………………………………………………………..12
    附5………………………………………………………………………..13